Kenwood KDC-355U Instruction Manual

Also see for KDC-155U: Instruction manual

Contents

9ENGLISH |Default: XXSEEK MODE Selects the tuning method for the 4 / ¢ buttons.CHANNEL: Manually search for a channel. ; PRESET: Search for a preset channel ofthe selected band.CHANNEL LOCK/ CH LOCK To unlock settings:1 Turn the volume knob to select a number.2 Press 4 / ¢ to move to the entry position.3 Repeat steps 1 and 2 to enter the current pass code.(Initial pass code is 0000.)4 Press the volume knob to confirm.CODE SET 1 Turn the volume knob to select a number.2 Press 4 / ¢ to move to the entry position.3 Repeat steps 1 and 2 to enter a new 4-digit pass code.4 Press the volume knob to confirm.5 Repeat steps 1 to 4 to reconfirm the pass code.• Make a note of the new pass code to enter channel lock settings from next time.CHANNEL EDIT/CH EDIT * 1 Turn the volume knob to select a category, then press the knob.2 Turn the volume knob to select a channel you want to lock, then press theknob. “L” appears in front of the channel number.3 Press G to exit.CHANNEL CLEAR/CH CLEAR * YES: Clears all the locked channels. ; NO: Cancels.MATURE CH ON: Turns on the Sirius XM-defined lock setting (mature channel). ; OFF: Turns off.• If [ON] is selected, your setting (CHANNEL EDIT/ CH EDIT) is temporary ignored.SIGNAL LEVEL/ SIGNAL LVL NO SIGNAL/ WEAK/ GOOD/ STRONG: Shows the strength of the current received signal.BUFFER USAGE/ BUF USAGE 0% — 100% (0): Shows the memory usage for Replay buffer.* Displayed only when [MATURE CH] is set to [OFF].If a locked channel or a mature channel ([MATURE CH] is set to [ON])is selected, a pass code input screen appears. Enter the pass code toreceive the channel.• To store a channel of the current band: Press and hold one ofthe number buttons (1 to 6).• To select a stored channel of the current band: Press one of thenumber buttons (1 to 6)Direct Access Tuning (using RC-406) (except for KMR-355U )1 Press DIRECT to enter Direct Access Tuning.2 Press the number buttons to enter a channel number, then press4 / ¢ (+) to start searching.• To cancel, press or DIRECT.ReplayPress G.Replay starts from the live position (and “ ” lights up for KDC-X397 ).During Replay...• To pause or resume playback, press 6 38.• To skip the current song backward/forward, press 4 / ¢.• To rewind/fast-forward, press and hold 4 / ¢.• To exit from Replay and go to live, press G.Other settings1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to select [SETTINGS], then press the knob.3 Turn the volume knob to make a selection (see table on the right),then press the knob.4 Press and hold to exit.SiriusXM™