ENGLISH 5TUNER SETTINGPRESET TYPE NORMAL: Memorizes one station for each preset button in each band (FM1/FM2/ FM3/ MW/ LW). ; MIX: Memorizes one station for each preset button,regardless of the selected band.SYSTEMKEY BEEP ON: Activates the keypress tone. ; OFF: Deactivates.SOURCE SELECTBUILT-IN AUX ON: Enables AUX in source selection. ; OFF: Disables. ( 9)P-OFF WAIT Applicable only when the demonstration mode is turned off.Sets the duration when the unit will automatically turn off (while in standbymode) to save the battery.20M: 20 minutes ; 40M: 40 minutes ; 60M: 60 minutes ;WAIT TIME – – –: CancelsCD READ 1: Automatically distinguishes between audio file disc and music CD. ;2: Forces to play as a music CD. No sound can be heard if an audio file disc isplayed.F/W UPDATEUPDATE SYSTEMF/W UP xx.xx YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is notactivated).For details on how to update the firmware, see: www.kenwood.com/cs/ce/CLOCKCLOCK DISPLAY ON: The clock time is shown on the display even when the unit is turned off. ;OFF: Cancels.ENGLISH Selected language is use as the display langauge for [FUNCTION] menuand Tag information (folder name, file name, song title, artist name, albumname) if applicable.РУССКИЙGETTING STARTED RADIOSearch for a station1 Press repeatedly to select TUNER.2 Press repeatedly (or press / on RC-406)to select FM1/ FM2/ FM3/ MW/ LW.3 Press S / T (or press S / on RC-406) to search for astation.• To change the searching method for S / T: Pressrepeatedly.AUTO1 : Automatically search for a station.AUTO2 : Search for a preset station.MANUAL : Manually search for a station.• To store a station: Press and hold one of the number buttons(1 to 6).• To select a stored station: Press one of the number buttons (1 to 6)(or press one of the number buttons (1 to 6) on RC-406).Direct Access Tuning (using RC-406) (for )1 Press DIRECT to enter Direct Access Tuning.“– – – • –” (for FM) or “– – – –” (for MW/ LW) appears on the display.2 Press the number buttons to enter a frequency.3 Press to search for a station.• To cancel, press or DIRECT.• If no operation is done for 10 seconds after step 2, Direct AccessTuning is automatically canceled.