Kenwood KDC-4547U Instruction Manual

Contents

Kenwood KDC-4547U Instruction Manual Manual pdf 8 page image

8 | KDC-4547U/ KDC-4047U/ KDC-4047UGY/ KDC-4047UM/ KDC-414UM/ KDC-414UFunction SettingPerform configuration for this unit. You can set upthe following functions.1 Select a sourcePress the [SRC] button.Items to be displayed vary depending on the selectedsource. Refer to the function list shown later.2 Enter Function Setting modePress the [VOL] button.“FUNCTION” is displayed.3 Select the Function itemTurn the [VOL] knob to display your desireditem, and then press the [VOL] knob.Repeat the above operation to select thefunction item to set.Pressing the [ ] button allows you to go backto the previous item.4 Set the Function itemTurn the [VOL] knob to select your desiredsetting, and then press the [VOL] knob.5 Exit Function Setting modePress the [ ] button for at least 1 second.Function itemLegend :No. Function name: “Function name displayed onthis unit” ➤ “ Setting 1”*, “Setting 2”...The function related to the selected function item isdescribed. For where it appears, refer to the No. given inthe function list.⁄• The setting marked with * is a factory setting.• The function marked with * 1 is supported only by theKDC-4547U.• The function marked with *2 is supported only by theKDC-4547U/ KDC-4047U/ KDC-4047UM/ KDC-414U/KDC-414UM.¥ Clock Adjust: “CLOCK ADJ”/“CLOCK ADJUST”Sets the clock1. Turn the [VOL] knob to adjust the hour.2. Press the [VOL] knob to finish the houradjusting. The minute display blinks.3. Turn the [VOL] knob to adjust the minute.4. Press the [VOL] knob to finish the minuteadjusting.⁄• You can do this adjustment when “TIME SYNC” is set to“OFF”.ø Synchronize the clock: “TIME SYNC” ➤“ON”*,”OFF”Synchronizing the RDS station time data and thisunit’s clock.π Dimmer: “DIMMER SET” ➤ “ON”,”OFF”*Adjusts the brightness of the display according tothe surrounding illumination.[ Text Scroll: “TEXT SCROLL” ➤ “AUTO”,”MANUAL”*Scrolls the text display of CD, audio file and Radiotext.Selecting AUTO scrolls them automatically.“ Local Seek: “LOCAL SEEK” ➤ “ON”,”OFF”*Only stations whose reception is good aresearched in auto seek tuning. (FM only)] Seek Mode: “SEEK MODE” ➤“AUTO1”*,”AUTO2”,”MANUAL”Selects the tuning mode of the radio.Tuning mode Display OperationAuto seek “AUTO1” Automatic search for a station.Preset station seek “AUTO2” Search in order of the stations inthe Preset memory.Manual “MANUAL” Normal manual tuning control.‘ Auto Memory: “AUTO MEMORY”Memorizes six stations with good receptionautomatically.Selecting “YES” and then pressing the [VOL] knobstarts the auto memory operation.⁄• This setting can be made when “TYPE NORM”/“TYPENORMAL” is selected for the Switching> item.\ Monaural Reception: “MONO SET” ➤“ON”,”OFF”*You can reduce the noise when stereo broadcastsare received as monaural. (FM only)« News: “NEWS SET” ➤ “OFF”*,”0”-”90”Automatically receives news bulletin when itstarts. Set the time during which interrupt is to bedisabled after start of another news bulletin.Changing “NEWS 00M” to “NEWS 90M” turns thisfunction ON.If news bulletin starts when this function is ON,“NEWS” is displayed and news is received. If“20M” is has been set, reception of another newsbulletin will not start for 20 minutes.The news bulletin volume is the same level thatwas set for Traffic Information.