Kenwood KDC-461U Instruction Manual

Contents

10About USB devices• This unit can play MP3/WMA/AAC/WAV filesstored on a USB mass storage class device.• You cannot connect a USB device via a USB hub.• Connecting a cable whose total length is longerthan 5 m may result in abnormal playback.• This unit cannot recognize a USB device whoserating is other than 5 V and exceeds 1 A.About KENWOOD Music EditorLight and KENWOOD MusicControl• This unit supports the PC application KENWOODMusic Editor Light and Android™ applicationKENWOOD Music Control.• When you play audio files with song dataadded using the KENWOOD Music Editor Lightor KENWOOD Music Control, you can search foraudio files by Genres, Artists, Albums, Playlists,and Songs.• KENWOOD Music Editor Light and KENWOODMusic Control are available on the followingweb site: www.kenwood.com/cs/ce/About iPod/iPhoneMade for- iPod touch (1st, 2nd, 3rd, 4th, and 5thgeneration)- iPod classic- iPod nano (3rd, 4th, 5th, 6th, and 7thgeneration)- iPhone, iPhone 3G, 3GS, 4, 4S, 5• For the latest compatible list and softwareversions of iPhone/iPod, see: www.kenwood.com/cs/ce/ipod• You cannot operate iPod if “KENWOOD” or “ ”is displayed on iPod.Symptom RemedySound cannot be heard. • Adjust the volume to the optimumlevel.• Check the cords and connections.“PROTECT” appears andno operations can bedone.Check to be sure the terminals ofthe speaker wires are insulatedproperly, then reset the unit. Ifthis does not solve the problem,consult your nearest service center.• Sound cannot be heard.• The unit does not turn on.• Information shown onthe display is incorrect.Clean the connectors. ( 2)The unit does not work atall.Reset the unit. ( 3)• Radio reception is poor.• Static noise whilelistening to the radio.• Connect the antenna firmly.• Pull the antenna out all the way.“NA FILE” appears. Make sure the disc containssupported audio files. ( 9)“NO DISC” appears. Insert a playable disc into theloading slot.“TOC ERROR” appears. Make sure the disc is clean andinserted properly.“PLEASE EJECT” appears. Reset the unit. If this does notsolve the problem, consult yournearest service center.Disc cannot be ejected. Press and hold M to forcibly ejectthe disc. Be careful not to drop thedisc when it is ejected. If this doesnot solve the problem, reset theunit. ( 3)TROUBLESHOOTINGSymptom Remedy“READ ERROR” appears. Copy the files and folders onto theUSB device again. If this does notsolve the problem, reset the USBdevice or use another USB device.“NO DEVICE” appears. Connect a USB device, and changethe source to USB again.“COPY PRO” appears. A copy-protected file is played.“NA DEVICE” appears. Connect a supported USB device, andcheck the connections.“NO MUSIC” appears. Connect a USB device that containsplayable audio files.“iPod ERROR” appears. • Reconnect the iPod.• Reset the iPod.Noise is generated. Skip to another track or change thedisc.Tracks do not play backas you intended themto play.Playback order is determined whenfiles are recorded.“READING” keepsflashing.Do not use too many hierarchicallevels or folders.Elapsed playing time isnot correct.This is caused by how the tracks arerecorded.Correct characters are notdisplayed (e.g. albumname).This unit can only display uppercaseletters, numbers, and a limitednumber of symbols. UppercaseCyrillic letters can also be displayed if[RUSSIAN SET] is set to [BКЛ].( 4)MORE INFORMATION

/ 15

Related manuals for Kenwood KDC-461U