Kenwood KDC-508 Instruction Manual

Also see for KDC-5027: Service manual

Kenwood KDC-508 Instruction Manual Manual pdf 21 page image

English | 21Synchronize ClockSynchronizing the RDS station time data and thisunit's clock.Display Setting"SYNC ON" Synchronizes the time."SYNC OFF" Adjust the time manually.• It takes 3 to 4 minutes to synchronize the clock.DSI (Disabled System Indicator)A red indicator will blink on the unit after thefaceplate is removed, warning potential thieves.Display Setting"DSI ON" LED flashes."DSI OFF" LED OFF.Selectable IlluminationSelecting the button illumination color as greenor red.Display Setting"KEY RED" The illumination color is red."KEY GRN" The illumination color is green.Switching Display TypeSetting the Display type.Display Setting"DISP C" Demonstration."DISP A" Normal display type."DISP B" Silent display type.Contrast AdjustmentAdjusting the display contrast.Display and Setting"CONT 0"…"CONT 7" (Original setting)News Bulletin with Timeout SettingIt switches automatically when a news bulletinstarts even if the radio isn't being listenedto. Also, the time interval when interrupt isprohibited can be set.Display and Setting"NEWS OFF""NEWS 00M"…"NEWS 90M"When "NEWS 00M" — "NEWS 90M" is set, theNews Bulletin Interrupt function is ON.When it's ON, the "NEWS " indicator is ON.When the news bulletin starts, "NEWS" isdisplayed, and it switches to the news bulletin.• If you choose the "20M" setting, further news bulletinswill not be received for 20 minutes once the first newsbulletin is received.• The news bulletin volume is the same level that wasset for 'Traffic Information' (page 13).• This function is only available if the desired stationsends PTY-code for news bulletin or belongs to'Enhanced Other Network'-Network sending PTY-codefor news bulletin.• When the News Bulletin Interrupt function is ON, itswitches to an FM station.In Tuner modeLocal SeekOnly stations whose reception is good aresearched for in auto seek tuning.Display Setting"LO.S OFF" The local seek function is OFF."LO.S ON" The local seek function is ON.