14 | Quick Start GuideInstalling/Removing the unitNon-Japanese carsBend the tabs of the mounting sleevewith a screwdriver or the like andattach it in place.<• Make sure that the unit is installedsecurely in place. If the unit is unstable, itmay malfunction (for example, the soundmay skip).Japanese cars1 Remove the trim plate with reference to.2 Align the holes in the unit (two locationson each side) with the vehicle mountingbracket and secure the unit with theaccessory screws.8 mmMAX.ø5mm ø5mm8mmMAX.3 4Removing the trim plate1 Engage the catch pins on the extractionkey (Accessory2) and release the twolocks on the upper part of frame.Lift up and pull the frame forward asshown in the figure.CatchLockAccessory22 When the upper part of frame isremoved, remove the lower part of frame.<• The frame can be removed from thebottom side in the same manner.Removing the unit1 Remove the trim plate with reference to.2 Remove the faceplate.3 Insert the two extraction keys(Accessory2) deeply into the slots onboth sides as shown.4 Lower the extraction key toward thebottom, and then pull out the unithalfway while pressing the extraction keytowards the inside.Accessory2!• Be careful to avoid injury from the catchpins on the extraction key.5 Pull the unit all the way out with yourhands, being careful not to drop it.