Kenwood KDC-8020 Instruction Manual

Also see for KDC-8020: Service manual

Kenwood KDC-8020 Instruction Manual Manual pdf 8 page image

Fine-tuning so that the System Q value is optimal when settingthe speaker type.Speaker Settingswitch as shown below.4 Adjust the Audio itemPress the [4] or [¢] button.Adjustment Item Display RangeBass Center Frequency "Bass F" 60/70/80/100 or 150 HzBass level "Bass" –8 — +8Bass Q Factor "Bass Q" 1.00/1.25/1.50/2.00Bass Extend "Bass EXT" ON/OFFMiddle Center Frequency "MID F" 0.5/1.0/1.5/2.0 kHzMiddle level "Middle" –8 — +8Middle Q Factor "Middle Q" 1.0/2.0Treble Center Frequency "TRE F" 10.0/12.5/15.0/17.5 kHzTreble level "Treble" –8 — +8Balance "Balance" Left 15 — Right 15Fader "Fader" Rear 15 — Front 15Volume offset "V Offset" –8 — ±0• According to the Bass Q Factor setting value, the frequencies thatcan be set in Bass Center Frequency change as shown below.Bass Q Factor Bass Center Frequency1.00/1.25/1.50 60/70/80/1002.00 60/70/80/150• When the Bass Extend is set to ON, low frequency response isextended by 20%.• Volume offset: Each source's volume can be set as a differencefrom the basic volume.5 Exit Audio Control modePress the [AUD] button.1 Select the source for adjustmentPress the [SRC] button.2 Enter Audio Control modePress the [AUD] button for at least 1 second.3 Select the Audio item for adjustmentPress the [FM] or [AM] button.Each time the button is pressed the items that can be adjustedAudio ControlYou can recall the best sound setting preset for different types ofthe music.1 Select the source to setPress the [SRC] button.2 Select the Sound typePress the [Q] button.Each time the button is pressed the sound setting switches.Sound setting DisplayFlat "Flat"Rock "Rock"Top 40 "Top 40"Pops "Pops"Jazz "Jazz"Easy "Easy"Scan of Flat — Easy "Scan"User memory "User"• User memory: The values set on the

• Each setting value is changed with the (page8).First, select the speaker type with the Speaker setting.System QGeneral features— 8 —English