Kenwood KDC-BT35U Instruction Manual

Contents

ENGLISH 21REMOTE CONTSTEERING WHEELREMOTE INPUTP. CONTANT CONTMUTEWiring connectionFuse (10 A)Antenna terminalMicrophone input jack ( 8)Rear/subwoofer outputLight blue/yellow(Steering remotecontrol wire)To the steering wheelremote control adapterBlue/White(Power controlwire/ Antennacontrol wire)Brown(Mute control wire)To the power controlterminal when using theoptional power amplifieror to the antenna controlterminal in the vehicleTo connect the Kenwoodnavigation system, referyour navigations manualYellow (A4)Red (Ignition wire)Red (A7)Yellow (Battery wire)Pin Color and functionA4 Yellow : BatteryA5 Blue/White : Power controlA7 Red : Ignition (ACC)A8 Black : Earth (ground) connectionB1 Purple ] : Rear speaker (right)B2 Purple/black [B3 Gray ] : Front speaker (right)B4 Gray/black [B5 White ] : Front speaker (left)B6 White/black [B7 Green ] : Rear speaker (left)B8 Green/black [ ISO connectorsConnecting the ISO connectors on some VW/Audi orOpel (Vauxhall) automobilesYou may need to modify the wiring of the suppliedwiring harness as illustrated below.UnitVehicleA7 (Red)Ignition wire(Red)A4 (Yellow)Default wiringBattery wire(Yellow)If no connections are made, do not let thewire come out from the tab.Part list forinstallation(A) Faceplate(C) Mounting sleeve(B) Trim plate(D) Wiring harness(E) Extraction keyWhen connecting to an external amplifier, connect its groundwire to the car’s chassis to avoid damaging the unit.