Kenwood KDC-BT368U Instruction Manual

Kenwood KDC-BT368U Instruction Manual Manual pdf 29 page image

ENGLISH 25REFERENCESMaintenanceCleaning the unitWipe off dirt on the faceplate with a dry silicone or soft cloth.Cleaning the connectorDetach the faceplate and clean the connector gentlywith a cotton swab, being careful not to damagethe connector.Handling discs• Do not touch the recording surface of the disc.• Do not stick tape etc. on the disc, or use a disc with tape stuck on it.• Do not use any accessories for the disc.• Clean from the center of the disc and move outward.• Clean the disc with a dry silicone or soft cloth. Do not use any solvents.• When removing discs from this unit, pull them out horizontally.• Remove burrs from the center hole and disc edge before inserting a disc.More informationFor: – Latest firmware updates and latest compatible item list– Android™ application KENWOOD MUSIC PLAY– KENWOOD original application– Any other latest informationVisit .General• This unit can only play the following CDs:• For detailed information and notes about the playable audio files, visit.Connector (on the reverseside of the faceplate)Playable files• Playable audio file: MP3 (.mp3), WMA (.wma), AAC (.aac)• Playable disc media: CD-R/CD-RW/CD-ROM• Playable disc file format: ISO 9660 Level 1/2, Joliet, Long file name.• Playable USB device file system: FAT12, FAT16, FAT32Even when audio files comply with the standards listed above, playback may be impossibledepending on the types or conditions of media or device.The AAC (.m4a) file in a USB device or a CD encoded by iTunes cannot be played on this unit.Unplayable discs• Discs that are not round.• Discs with coloring on the recording surface or discs that are dirty.• Recordable/ReWritable discs that have not been finalized.• 8 cm CD. Attempting to insert using an adapter may cause malfunction.About USB devices• This unit can play MP3/WMA/AAC/WAV/FLAC files stored on a USB mass storage class device.• You cannot connect a USB device via a USB hub.• Connecting a cable whose total length is longer than 5 m may result in abnormal playback.• This unit cannot recognize a USB device whose rating is other than 5 V and exceeds 1.5 A.About iPod/iPhone• Via USB:Made for– iPod touch (5th and 6th generation)– iPod nano (7th generation)– iPhone 4S, 5, 5S, 5C, 6, 6 Plus, 6S, 6S Plus• Via Bluetooth:Made for– iPod touch (5th and 6th generation)– iPhone 4S, 5, 5S, 5C, 6, 6 Plus, 6S, 6S Plus• You cannot operate iPod if “KENWOOD” or “ ” is displayed on iPod.• Depending on the version of the operating system of the iPod/iPhone, some functions maynot operate on this unit.