Kenwood KDC-BT720HD Instruction Manual

ENGLISH 5HD Radio™ tunerSearch for a station1 Press repeatedly to select HD RADIO.2 Press repeatedly (or press / onRC-406) to select FM1/ FM2/ FM3/ AM.3 Press S / T (or press S / on RC-406) to searchfor a station or channel.• To change the searching method for S / T: Pressrepeatedly.AUTO1 : Automatically search for a station or channel.AUTO2 : Search for a preset station or channel.MANUAL : Manually search for a station or channel.• To store a station or channel: Press and hold one of thenumber buttons (1 to 6).• To select a stored station or channel: Press one of the numberbuttons (1 to 6) (or press one of the number buttons (1 to 6) onRC-406).Direct Access Tuning (using RC-406)1 Press DIRECT to enter Direct Access Tuning.2 Press the number buttons to enter a frequency.3 Press to search for a station or channel.• To cancel, press or DIRECT.• If no operation is done for 10 seconds after step 2, Direct AccessTuning is automatically canceled.Select an HD Radio multicast channelMany HD Radio stations offer more than one channel programming.This service is called multicasting. While receiving HD Radio multicast channels....Press S / T to select your desired channel (HD1 to HD8).“LINKING” appears while linking to a multicast channel.Other settings1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to make a selection (see the following table), thenpress the knob.3 Repeat step 2 until the desired item is selected or activated.4 Press and hold to exit.To return to the previous setting item, press .Default: XXTUNER SETTINGIF BAND AUTO: Increases the tuner selectivity to reduce interference noises from adjacentFM stations. (Stereo effect may be lost.) ; WIDE: Subjects to interference noises fromadjacent FM stations, but sound quality will not be degraded and the stereo effectwill remain.AUTOMEMORYYES: Automatically starts memorizing 6 stations with good reception. ; NO: Cancels.• Selectable only if [NORMAL] is selected for [PRESET TYPE]. ( 4)RECEIVEMODESets the receive mode of the HD Radio receiver.AUTO: Automatically tunes to analog broadcast when there is no digital broadcast. ;DIGITAL: Tunes in to digital broadcast only. ; ANALOG: Tunes in to analog broadcastonly.CLOCKTIME SYNC ON: Synchronizes the unit’s time to the Radio Broadcast Data System station time. ;OFF: Cancels.You can tune in to both conventional and HD Radio broadcasts.• To find HD Radio stations in your area, visit.