Kenwood KDC-BT742U Instruction Manual

Also see for eXcelon KDC-X493: Service manual Instruction manual

Contents

Kenwood KDC-BT742U Instruction Manual Manual pdf 21 page image

Audio SetupYou can set Sound system, such as follows;Function of KDC-X493/MP442USpeaker Setting1 Enter StandbyPress the [SRCj button.Select the "STANDBY" display.2 Enter Speaker Setting modePress the [AUDj knob.3 Select the Speaker typeTurn the [AUDj knob.4 Exit Speaker Setting modePress the [AUDj knob.Fine-tuning so that the System Q value is optimalwhen setting the speaker type as follows;Subwoofer Phase*l. 2 "SW PHASE"Volume offset "V-OFFSET"Dual Zone System "2Z0NE"Adj'ustmenll_ril'il DIsp!g We . c' ;I _~G'~l;¥;;;,:Jh>' i' .JiIFront High Pass "HPF F" Through/40*'/60*'/80/100/Filter*" 2 120/150/180/220*' HzRear High Pass "HPF R" Through/40*'/60*'/80/100/Filter*" 2 1201150/180/220*' HzLow Pass Filter*" 2 "LPF SW" 50*'/60/80/100*1/120/Through Hz----Reverse (1800 )/ Normal (00 )-8 - ±O (AUX: -8- +8)OFF/ONQ.-~*1 Function of KDC-X493.*2 Function of KDC-MP442U.• Volume offset: Sets each source's volume as a differencefrom the basic volume.• Dual Zone SystemMain source and sub source (Auxiliary input) outputFront channel and Rear channel separately.- Set up the channel of sub source by "ZONE2" of (page 6).- Select Main source by [SRC] button.- Adjust the volume of Front channel by [AUD] knob.- Adjust the volume of Rear channel by

(page 20) or [.]/[..-] button on the remote control(page 34).- The Audio Control has no effect on sub source.1 Select the source to adjustPress the [SRCj button.2 Enter Audio Setup modePress the [AUD] knob for at least 1 second.3 Select the Audio Setup item to adjustPress the [AUDj knob.4 Adjust the Audio setup itemTurn the [AUDj knob.S Exit Audio Setup modePress the [AUDj knob for at least 1 second.English I 21