Kenwood KDC-DAB43U Quick Start Manual

Also see for KDC-DAB43U: Manual Instruction manual Kurzanleitung

Contents

STEERING WHEELREMOTE INPUTMUTEANT. CONTP.CONTREMOTE CONT1234567812345678LR8 | Quick Start GuideWiring connectionFM/AM antenna input (JASO)AUX input (Stereo)Use the mini-plug (3.5 mm ø) cable which isstereo type and does not have any resistance. Fuse (10A)Rear output/ Sub Woofer output switchableX (page 6)DAB antenna input (SMB)X (page 6)Wiring harness DIf no connections are made, do not let the wire come out fromthe tab.Blue/White(Power control/ Antennacontrol wire)Connect either to the power controlterminal when using the optionalpower amplifier, or to the antennacontrol terminal in the vehicle.Brown(Mute control wire)To use the steering wheel remotecontrol feature, you need to anexclusive remote adapter (notsupplied) matches your car isrequired.Light Blue/Yellow(Steering remote control wire)Connect to the terminal that isgrounded when either the telephonerings or during conversation.To connect the Kenwood navigationsystem, consult your navigationmanual.Connector AYellow (Battery wire)Yellow (Battery wire) Yellow (A–4 Pin)Default wiringRed (A–7 Pin)Connector BRed (Ignition wire)Red (Ignition wire)UnitRed (A–7 Pin)VehicleYellow (A–4 Pin)USB connector Antenna CordDAB antenna CordConnecting the ISO connectors on some VW/Audi or Opel (Vauxhall) automobilesYou may need to modify the wiring of the supplied wiringharness as illustrated below.Pin Color and function Pin Color and functionA4 Yellow Battery B1 / B2 Purple ¢ / Purple/black ¤ Rear speaker (right)A5 Blue/White Power control B3 / B4 Gray ¢ / Gray/black ¤ Front speaker (right)A7 Red Ignition (ACC) B5 / B6 White ¢ / White/black ¤ Front speaker (left)A8 Black Earth (ground) connection B7 / B8 Green ¢ / Green/black ¤ Rear speaker (left)