Kenwood KDC-HD262U Instruction Manual

Also see for KDC-HD262U: Instruction manual

Contents

ENGLISH 5HD Radio™ tunerSearch for a station or channel1 Press to select HD RADIO.2 Press repeatedly (or press / on RC-406) toselect FM1/ FM2/ FM3/ AM.3 Press S / T (or press S / on RC-406) to search for astation or channel.• To change the searching method for S / T: Pressrepeatedly.AUTO1 : Automatically search for a station or channel.AUTO2 : Search for a preset station or channel.MANUAL : Manually search for a station or channel.• To store a station or channel: Press and hold one of the numberbuttons (1 to 6).• To select a stored station or channel: Press one of the number buttons(1 to 6) (or press one of the number buttons (1 to 6) on RC-406).Direct Access Tuning (using RC-406)1 Press DIRECT to enter Direct Access Tuning.2 Press the number buttons to enter a frequency or channel.3 Press to search for a station or channel.• To cancel, press or DIRECT.• If no operation is done for 10 seconds after step 2, Direct AccessTuning is automatically canceled.You can tune in to both conventional and HD Radio broadcasts.• To find HD Radio stations in your area, visit.Select an HD Radio multicast channelMany HD Radio stations offer more than one channel programming.This service is called multicasting. While receiving HD Radio multicastchannels....Press S / T to select your desired channel (HD1 to HD8).“LINKING” appears while linking to a multicast channel.Other settings1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to make a selection (see the following table),then press the knob.3 Repeat step 2 until the desired item is selected or activated.4 Press and hold to exit.To return to the previous setting item, press .Default: XXTUNER SETTINGIF BAND AUTO: Increases the tuner selectivity to reduce interference noises fromadjacent FM stations. (Stereo effect may be lost.) ; WIDE: Subjects tointerference noises from adjacent FM stations, but sound quality will notbe degraded and the stereo effect will remain.AUTOMEMORYYES: Automatically starts memorizing 6 stations with good reception. ;NO: Cancels.• Selectable only if [NORMAL] is selected for [PRESET TYPE]. ( 4)RECEIVE MODE Sets the receive mode of the HD Radio receiver.AUTO: Automatically tunes to analog broadcast when there is no digitalbroadcast. ; DIGITAL: Tunes in to digital broadcast only. ; ANALOG: Tunesin to analog broadcast only.CLOCKTIME SYNC ON: Synchronizes the unit’s time to the Radio Broadcast Data Systemstation time. ; OFF: Cancels.