Kenwood KDC-M6024/G Instruction Manual

Also see for KDC-5024: Service manual Mode d'emploi Istruzioni per l'uso

— 35 —nit mayiring.tablee fuse within thisnected tosource.out.e wire iscar.? Even if Loudness is turned ON, high-pitched tone isn't compensatedfor. 17✔ Tuner source is selected.☞ High-pitched tone isn't compensated for when in Tuner source.? No sound can be heard, or the volume is low.✔ The fader or balance settings are set all the way to one side.21☞ Center the fader and balance settings.✔ The input/output wires or wiring harness are connected incorrectly.22☞ Reconnect the input/output wires or the wiring harness correctly.See the section on .✔ The values of Volume offset are low.24☞ Turn up the Volume offset, referring to the section on control> (page 9).? The sound quality is poor or distorted.25✔ One of the speaker wires is being pinched by a screw in the car.☞ Check the speaker wiring.✔ The speakers are not wired correctly.27☞ Reconnect the speaker wires so that each output terminal isconnected to a different speaker.? There’s no Front High Pass Filter and Rear High Pass Filter effect.31✔ The Non-fading preout is being used.☞ There’s no effect in Non-fading preout.? The Touch Sensor Tone doesn’t sound.34✔ The preout jack is being used.☞ The Touch Sensor Tone can’t be output from the preout jack.? Even though Synchronize Clock is ON, the clock can’t be adjusted.35✔ The received RDS station isn’t sending time data.☞ Receive another RDS station.? The Dimmer function doesn’t work. 38-1✔ The Dimmer wire isn’t connected correctly.☞ Check the Dimmer wire connection.? The display color changes subtly. 38-2✔ This is because the temperature is different than the temperaturewhen the setting was done.☞ The display color condition changes subtly according.to theambient temperature.