Kenwood KDC-M6024G Service Manual

Also see for KDC-M6024/G: Instruction manual Mode d'emploi Istruzioni per l'uso Service manual

Contents

Kenwood KDC-M6024G Service Manual Manual pdf 8 page image

KDC-M6024/G/GY/YKDC-MP522,X5698TEST MODE10. Special display when the display is all onPressing the Preset keys while the power is ALL OFF dis-plays the following information.11. Change the condition of TUNER channelspace selection (K/M type only)While holding the preset 1 key and 5 keys, reset the unit.Security-related information1. Forced Power ON mode (All models)Even when the security is approved, resetting the unit whileholding the Q and Preset 4 keys makes it possible to turnthe power ON for 30 minutes.After 30 minutes have elapsed, it is not possible to return tothe previous condition unless the unit is reset again.2. Method of registration of the security codeafter EEPROM (Tuner unit assy) replacement(Code security model)1. Enter the test mode. (See 1. How to enter the test mode)2. Press the MENU key to enter the MENU mode.3. Press and hold down the Track up/down key for 1 seconduntil “Security” is displayed.4. Enter the code using the FM/AM/TARCK up/down keys.• FM key: number is up• AM key: number is dawn• Track up key: move the cursor for right side• Track down key: move the cursor for left side5. Hold down the Track up key for at least 3 seconds andthe message, "RE-ENTER" appears, so once again enterthe code according to Step 3 above.6. Press and hold the Track up key for 3 seconds until"APPROVED" is displayed.7. Exit from the test mode. (See 2. How to exit from the test mode)(Note) All Clear is not applicable to the security code ofthis model.3. Simplified method of clearing the securitycode (K, E Type only)1. While the code entry is requested, press and hold theTRACK UP key for 3 seconds while holding the DISP keypressed. (This should turn "----" off.)2. Enter “KCAR “from the remote.• Press the 5 key on the remote twice, and then press theTrack Up key. (This enters "K".)• Press the 2 key on the remote 3 times, and then pressthe Track Up key. (This enters "C".)• Press the 2 key on the remote once, and then press theTrack Up key. (This enters "A".)• Press the 7 key on the remote twice, and then press theTrack Up key. (This enters "R".)3. The security code is cleared and the unit enters the ALLOFF mode.4. If you commit a mistake in the code entry, the unit entersthe code request mode again.Version display (8 digits, Month/Day/Hour/Minute)(Display) SYS xxxxxxxxSerial No. display (8 digits)(Display) S. No. xxxxxxxxShort press: View power ON time.(The All OFF period is not counted.)Long press/hold: Clear power ON time.(Display) PonTim xxxxx Max. 60,000 (hours)Short press: Display CD operation time.Long press/hold: Clear CD operation time(Display) CDTime xxxxx Max. 60,000 (hours)Short press: Display CD ejection count.Long press/hold: Clear CD ejection count.(Display) EjeTim xxxxx Max. 60,000 (times)Short press: Display Panel open/close count.Long press/hold: Clear Panel open/close count.(Display) PnCnt xxxxx Max. 60,000 (times)ROM correction version information(Display) ROM RxxxxIf not mounting ROM correction chip set displayshows ROM R_PRESET 1PRESET 2PRESET 3PRESET 4PRESET 5PRESET 6FMwww . xiaoyu163. comQQ 376315150 992894298TEL 13942296513 992894298051513673QQTEL 13942296513 QQ 376315150 892498299TEL 13942296513 QQ 376315150 892498299