Kenwood KDC-MP172U Instruction Manual

Contents

10AUDIO SETTINGSWhile listening to any source...1 Press AUD to enter [AUDIO CONTROL] directly.2 Turn the volume knob to select an item (see the following table),then press the knob.3 Repeat step 2 until the desired item is selected or activated.4 Press and hold to exit.To return to the previous setting item, press .(or using the remote control)1 Press AUD to enter [AUDIO CONTROL].2 Press J / K to select an item, then press .Default: XXAUDIO CONTROLSUB-W LEVEL –15 to +15 (0) Adjusts the subwoofer output level.BASS LEVEL –8 to +8 (+2) Adjusts the level to memorize for each source. (Beforemaking an adjustment, select the source you wantto adjust.)MID LEVEL –8 to +8 (+1)TRE LEVEL –8 to +8 (+1)EQ PRO (This setting is stored to [USER].)BASS ADJUST BASS CTR FRQ 60/80/100/200: Selects the center frequency.BASS LEVEL –8 to +8 (+2): Adjusts the level.BASS Q FACTOR 1.00/1.25/1.50/2.00: Adjusts the quality factor.BASS EXTEND ON: Turns on the extended bass. ; OFF: Cancels.MID ADJUST MID CTR FRQ 0.5KHZ/1.0KHZ/1.5KHZ/2.5KHZ: Selects thecenter frequency.MID LEVEL –8 to +8 (+1): Adjusts the level.MID Q FACTOR 0.75/1.00/1.25: Adjusts the quality factor.TRE ADJUST TRE CTR FRQ 10.0KHZ/12.5KHZ/15.0KHZ/17.5KHZ: Selects thecenter frequency.TRE LEVEL –8 to +8 (+1): Adjusts the level.PRESET EQ DRIVE EQ/TOP40/POWERFUL/ROCK/POPS/EASY/JAZZ/NATURAL/USER: Selects a preset equalizer suitable to the music genre. (Select[USER] to use the settings made in [EQ PRO].)[DRIVE EQ] is a preset equalizer that reduces noise outside the car orrunning noise of the tyres.BASS BOOST LV1/LV2/LV3: Selects your preferred bass boost level. ; OFF: Cancels.LOUDNESS LV1/LV2: Selects your preferred low and high frequencies boost toproduce a well-balanced sound at a low volume level. ; OFF: Cancels.SUBWOOFER SET ON: Turns on the subwoofer output. ; OFF: Cancels.ENGLISH