English | 17In Standby modeManual Clock Adjustment1 Select Clock Adjustment modePush the Control knob towards [FM] or [AM].Select the "CLK ADJ" display.2 Enter Clock Adjust modePress the Control knob for at least 1 second.The clock display blinks.3 Adjust the hoursPush the Control knob towards [FM] or [AM].Adjust the minutesPush the Control knob towards [4] or [¢].4 Exit Clock adjustment modePress the [MENU] button.In Standby modeDSI (Disabled System Indicator)A red indicator will blink on the unit after thefaceplate is removed, warning potential thieves.Display Setting"DSI ON" LED flashes."DSI OFF" LED OFF.DimmerYou can lower the brightness of the display by usingthe dimmer function.Display Setting"DIM ON" The display dims."DIM OFF" The display doesn’t dim.In Standby modeSwitching preoutAlternating the preout between the rear andsubwoofer. (With the subwoofer the sound outputswithout being effected by fader control.)Display Setting"SWPRE R" Rear preout."SWPRE SW" Subwoofer preout.In Audio file sourceSupreme SettingWhen MP3 or WMA files encoded at a low bit rate(less than 96kbps (fs=32k, 44.1k, 48kHz)) are played,this function restores their high frequency regionto approach the sound quality of equivalents ofthese files encoded at a high bit rate. Processing isoptimized for the compression format used (MP3, orWMA), and adjustment is made for the bit rate used.Display Setting"SPRM ON" Plays sound using the Supreme function."SPRM OFF" Plays the original sound stored in the audio file.⁄• The sound effect may be imperceptible dependingon the relationship between the audio file format andsetting.In FM receptionCRSC (Clean Reception System Circuit)Temporarily have reception alternate from stereo tomono to reduce multi-path noise when listening tothe FM station.Display Setting"CRSC ON" The CRSC is ON."CRSC OFF" The CRSC is OFF.⁄• Strong electrical fields (such as from power lines) maycause unstable sound quality when CRSC is turned ON.In such a situation, turn it OFF.