Kenwood KDC-MP333V Instruction Manual

Also see for KDC-MP333V: Service manual

4 | EnglishNotes• If you experience problems during installation,consult your Kenwood dealer.• When you purchase optional accessories, checkwith your Kenwood dealer to make sure that theywork with your model and in your area.• If the unit fails to operate properly, press the Resetbutton. The unit returns to factory settings whenthe Reset button is pressed.• The characters which can be displayed by thisunit are A-Z 0-9 @ " ‘ ` % & * + – = , . / \ < > [ ] ( ) : ;^ - { } | ~ .• Video CD images are displayed on the monitorunit (an optional accessory) connected to thesystem.No Video CD image is displayed if the parkingbrake is released.Before watching the Video CD images, park yourcar in a safety place and apply the parking brake.• The illustrations of the display and the panelappearing in this manual are examples used toexplain more clearly how the controls are used.Therefore, what appears on the display in theillustrations may differ from what appears on thedisplay on the actual equipment, and some of theillustrations on the display may be inapplicable.Cleaning the UnitIf the faceplate of this unit is stained, wipe it with adry soft cloth such as a silicon cloth.If the faceplate is stained badly, wipe the stain offwith a cloth moistened with neutral cleaner, thenwipe it again with a clean soft dry cloth.• Applying spray cleaner directly to the unit may affect itsmechanical parts. Wiping the faceplate with a hard clothor using a volatile liquid such as thinner or alcohol mayscratch the surface or erases characters.Cleaning the Faceplate TerminalsIf the terminals on the unit or faceplate get dirty,wipe them with a dry, soft cloth.The marking of products using lasers(Except for some areas)CLASS 1LASER PRODUCTThe label is attached to the chassis/case and saysthat the component uses laser beams that havebeen classified as Class 1. This means that the unitis utilizing laser beams that are of a weaker class.There is no danger of hazardous radiation outsidethe unit.Reset button