S Repeat steps 3 and 4, and complete theSecurity Code.6 Confirm the Security CodePress the Control knob for at least 3 second.When "RE-ENTER" is displayed, "CODE" is alsodisplayed.7 Do the step 3 through 6 operation, and reenterthe Security Code."APPROVED" is displayed.The Security Code function activates.~~• If you enter the wrong Code in steps 3 through 5, repeatfrom step 3.• When the Security Code function is activated, "SECURITYSET" changes to "SECURITY CLR':• To deactivate the Security Code function, see the nextsection .8 Exit Security Code modePress the [MJOG] button.Entering Security CodeThe Security Code is required to use the audio unitwhen the unit is first used after removed from thebattery power source or the Reset button is pressed.1 Turn the power ON.2 Do the step 3 through 6 operation, and enterthe Security Code."APPROVED" is displayed.Deactivating Security CodeDeactivating the Security Code function.1 Select Security Code item during Menu modeSelect the "SECURITY CLR" display.For how to select menu items, refer to System>(page 12).2 Enter Security Code modePress the Control knob for at least 1 second.When "ENTER" is displayed, "CODE" is also displayed.3 Select the digits to enterPush the Control knob towards right or left.4 Select the Security Code numbersPush the Control knob towards up or down.S Repeat steps 3 and 4, and complete theSecurity Code.6 Press the Control knob for at least 3 second."CLEAR" is displayed.The Security Code function deactivates.7 Exit Security Code modePress the [MJOG] button.~~• If the entered security code is incorrect, "ERROR" isdisplayed. Enter a correct security code.Manual Clock Adjustment1 Select Clock Adjustment item during MenumodeSelect the "CLOCK ADJUST' display.For how to select menu items, refer to System>(page 12).2 Enter Clock Adjust modePress the Control knob for at least 1 second.The clock display blinks.3 Adjust the timePush the control knob towards up or down toadjust the hours and right or left to adjust theminutes.4 Exit Clock adjustment modePress the [MJOG] button.Function of KDC-X492When LX AMP unit connectingAMP ControlYou can control the LX AMP connected to the unit.1 Select AMP Control item during Menu modeSelect the "AMS CONTROL' display.For how to select menu items, refer to System>(page 12).2 Enter AMP Control modePress the Control knob for at least 1 second.3 Select the AMP Control item for adjustmentPush the Control knob towards up or down.~• For the details on the AMP Control item, see theInstruction manual attached to the LX AMP4 Adjust the AMP Control itemPush the Control knob towards right or left.S Exit AMP Control modePress the [MJOG] button.English I 13
