Kenwood KDC-MP4029 Instruction Manual

Also see for KDC-2029: Service manual

Kenwood KDC-MP4029 Instruction Manual Manual pdf 22 page image

22 | EnglishMenu systemFunction of the KDC-MP4029/MP4029G/3029/3029R/2029In Standby modeSecurity CodeBecause authorization by the Security Code isrequired when it’s removed from the vehicle,personalizing this unit is by using the SecurityCode is a help in preventing theft.• When the Security Code function is activated, it can’t bereleased.Note, your Security Code is the 4 digit number entered inyour "Car Audio Passport" in this package.1 Enter StandbyPress the [SRC] button.Select the "STANDBY" display.2 Enter Menu modePress the [MENU] button for at least 1 second.When "MENU" is displayed, "SECURITY" isdisplayed.3 Enter Security Code modePress the Control knob for at least 2 seconds.When "ENTER" is displayed, "CODE" is displayed.4 Select the digits to enterPush the Control knob to [4] or [¢].5 Select the Security Code numbersPush the Control knob to [FM] or [AM].6 Repeat steps 4 and 5, and complete theSecurity Code.7 Confirm the Security CodePress the Control knob for at least 3 seconds.When "RE-ENTER" is displayed, "CODE" isdisplayed.8 Do the step 4 through 7 step operation, andreenter the security code."APPROVED" is displayed.The Security Code function activates.• If you enter a Code different from your Security Code,you have to start over from step 4.Press the Reset button and when it’s removedfrom the battery power source1 Turn the power ON.2 Do the step 4 through 7 step operation, andreenter the security code."APPROVED" is displayed.The unit can be used.• If an incorrect code is input, "WAITING" is displayed,and the input prohibited time shown below isgenerated.After the input prohibited time lapses, "CODE" isdisplayed, and input can be done.Number of times theincorrect code was inputInput prohibited time1 —2 5 minutes3 1 hour4 24 hoursIn Standby modeTouch Sensor ToneSetting the operation check sound (beep sound)ON/OFF.Display Setting"BEEP ON" Beep is heard."BEEP OFF" Beep canceled.In Standby modeManual Clock Adjustment• This adjustment can be done when the Clock> (page 23) is set as OFF (KDC-3029R).1 Select Clock Adjustment modePush the Control knob to [FM] or [AM].Select the "CLK ADJ" display.2 Enter Clock Adjust modePress the Control knob for at least 2 seconds.The clock display blinks.3 Adjust the hoursPush the Control knob to [FM] or [AM].Adjust the minutesPush the Control knob to [4] or [¢].