Kenwood KDC-MP435U Instruction Manual

Also see for KDC-MP435U: Firmware update guide Service manual

Kenwood KDC-MP435U Instruction Manual Manual pdf 8 page image

8 | EnglishGeneral featuresAudio Control1 Select the source to adjustPress the [SRC] button.2 Enter Audio Control modePress the [VOL] knob.3 Select the Basic Audio item to adjustPress the [VOL] knob.Each time you press the knob, the item to beadjusted alternates between the items shown inthe table below.4 Adjust the Basic Audio itemTurn the [VOL] knob.Adjustment Item Display RangeRear Volume* 1 "R-VOL" 0 — 35Subwoofer level "SW L" –15 — +15System Q "NATURAL"/"USER"/"ROCK"/"POPS"/"EASY"/"TOP40"/"JAZZ"Natural/User/Rock/Pops/Easy/Top 40/JazzBass level*2 "BAS L" –8 — +8Middle level* 2 "MID L" –8 — +8Treble level*2 "TRE L" –8 — +8Balance "BAL" Left 15 — Right 15Fader "FAD" Rear 15 — Front 15Exit Audio Control mode (Volume control mode)• *1 Function of KDC-X491• * 2 You can adjust these items in detail. Refer to(Page 8).(Function of KDC-X491)• * 2 Source tone memory: Puts the set up value in thememory per source. (Detail Audio item is included)⁄ About System Q• You can recall the best sound setting preset for differenttypes of music.• Change each setting value with the (page 9). First, select the speaker type with the Speakersetting.• "USER": The ranges selected lastly for Bass level, Middlelevel, and Treble level are recalled automatically.5 Exit Audio Control modePress any button.Press a button other than the [VOL] knob and [ATT]button.Function of KDC-X491Adjusting the detail of Audio ControlAmong the Basic Audio items, you can adjust the Basslevel, Middle level, and Treble level in detail.1 Select the Basic Audio itemSelect the desired item to be set in detail fromfollowings;• Bass level• Middle level• Treble levelFor how to select Basic Audio items, see Control> (page 8).2 Enter Detail adjustment mode of AudioControlPress the [VOL] knob for at least 1 second.3 Select the Detail Audio item to adjustPress the [VOL] knob.Each time you press the knob, the item to beadjusted alternates between the items shown inthe table below.4 Adjust the Detail Audio itemTurn the [VOL] knob.Bass levelAdjustment Item Display RangeBass Center Frequency "BAS F" 40/50/60/70/80/100/120/150 HzBass Q Factor "BAS Q" 1.00/1.25/1.50/2.00Bass Extend "B EX" OFF/ONMiddle levelAdjustment Item Display RangeMiddle Center Frequency "MID F" 0.5/1.0/1.5/2.0 kHzMiddle Q Factor "MID Q" 1.0/2.0Treble levelAdjustment Item Display RangeTreble Center Frequency "TRE" 10.0/12.5/15.0/17.5 kHz5 Exit the Detail Audio Control modePress the [VOL] knob for at least 1 second.⁄• When you set the Bass Extend to ON, low frequencyresponse is extended by 20%.• You can exit the Audio Control mode at anytime bypressing any button except for [VOL] knob and [ATT]button.