|
4 | EnglishNotes• No USB device comes with this unit. You need topurchase a commercially available USB device. Forthe types of available USB devices, refer to USB device> (page 7).• If you experience problems during installation,consult your Kenwood dealer.• When you purchase optional accessories, checkwith your Kenwood dealer to make sure that theywork with your model and in your area.• The characters which can be displayed by thisunit are A-Z 0-9 @ " ‘ ` % & * + – = , . / \ < > [ ] ( ) : ;^ - { } | ~ .• The illustrations of the display and the panelappearing in this manual are examples used toexplain more clearly how the controls are used.Therefore, what appears on the display in theillustrations may differ from what appears on thedisplay on the actual equipment, and some of theillustrations on the display may be inapplicable.How to reset your unit• If the unit fails to operate properly, press the Resetbutton. The unit returns to factory settings whenthe Reset button is pressed.• Remove the USB device before pressing the Resetbutton. Pressing the Reset button with the USBdevice installed can damage the data containedin the USB device. For how to remove the USBdevice, refer to (page 20).• Press the Reset button if the disc auto changerfails to operate correctly. Normal operation shouldbe restored.Reset buttonCleaning the UnitIf the faceplate of this unit is stained, wipe it with adry soft cloth such as a silicon cloth.If the faceplate is stained badly, wipe the stain offwith a cloth moistened with neutral cleaner, thenwipe it again with a clean soft dry cloth.• Applying spray cleaner directly to the unit may affect itsmechanical parts. Wiping the faceplate with a hard clothor using a volatile liquid such as thinner or alcohol mayscratch the surface or erase characters.Cleaning the Faceplate TerminalsIf the terminals on the unit or faceplate get dirty,wipe them with a dry, soft cloth.About "Media Manager" of PC applicationattached to KDC- KDC-X7533U• "Media Manager" is recorded in the CD-ROMattached to this unit.• Refer to the attached installation manual for theinstallation method of "Media Manager".• Refer to the user’s manual recorded in theinstallation CD-ROM and Help of "Media Manager"for the operation method of "Media Manager".• The unit can play CD/ USB device (hereafter called"ACDrive media") created by "Media Manager".• Refer to the following site for the updatedinformation of "Media Manager".http://www.kenwood.mediamanager.jp• Contact Kenwood for the function and operationof the "Media Manager".• "Media Manager" is a product of PhatNoise.
|
