Kenwood KDC-MP528 Instruction Manual

Also see for KDC-MP5028: Instruction manual Instruction manual Service manual Service manual

10 | EnglishGeneral featuresSystem QYou can recall the best sound setting preset fordifferent types of music.1 Select the source to setPress the [SRC] button.2 Select the Sound typePress the [Q] button.Each time the button is pressed, the soundsetting switches.Sound setting DisplayUser memory "USER"Rock "ROCK"Pops "POPS"Easy "EASY"Top 40 "TOP40"Jazz "JAZZ"Natural "NATURAL"• User memory: The values set on the

(page 10).• Each setting value is changed with the Setting> (page 12).First, select the speaker type with the Speaker setting.Audio Control1 Select the source for adjustmentPress the [SRC] button.2 Enter Audio Control modePress the [VOL] knob.3 Select the Basic Audio item for adjustmentPress the [VOL] knob.Each time the knob is pressed, the items that canbe adjusted switch as shown below.4 Adjust the Basic Audio itemTurn the [VOL] knob.Adjustment Item Display RangeRear Volume * 1 "R-VOL" 0 — 35Subwoofer level*2,3,4 "SW L" –15 — +15Bass level*5,6 "BAS L" –8 — +8Middle level* 5,6 "MID L" –8 — +8Treble level*5,6 "TRE L" –8 — +8Balance "BAL" Left 15 — Right 15Fader*4 "FAD" Rear 15 — Front 15Exit Audio Control mode• *1 You can control this item when "2ZON" of Setup> (page 11) is set to "ON".• * 2 You can control this item when (page 25) is set to "SWPRE SW". (KDC-MP5028/MP528 only)• * 3 You can control this item when Output> (page 11) is set to "SW ON".• *4 You can control this item when "2ZON" of Setup> (page 11) is set to "OFF".• * 5 These items can be adjusted in detail by thefollowing methods. (Function of the KDC-X589)• * 6 Source tone memory: The set up value is put in thememory per source. (Detail Audio item is included)5 Exit Audio Control modePress any button.Press the button which is not [VOL] knob and[ATT]/ [ANG] button.Adjust the detail of Audio Control1 Select the Audio item for adjustmentBy referring to the step 1 — 3 above, select thedesired item to be set in detail from the itemsmarked with *5.2 Enter Detail adjustment mode of AudioControlPress the [VOL] knob for at least 1 second.3 Select the Detail Audio item for adjustmentPress the [VOL] knob.Each time the knob is pressed, the items thatcan be adjusted switch as shown below.4 Adjust the Detail Audio itemTurn the [VOL] knob.Bass levelAdjustment Item Display RangeBass Center Frequency "BAS F" 40/50/60/70/80/100/120/150 HzBass Q Factor "BAS Q" 1.00/1.25/1.50/2.00Bass Extend "B EX" OFF/ONMiddle levelAdjustment Item Display RangeMiddle Center Frequency "MID F" 0.5/1.0/1.5/2.0 kHzMiddle Q Factor "MID Q" 1.0/2.0Treble levelAdjustment Item Display RangeTreble Center Frequency "TRE" 10.0/12.5/15.0/17.5 kHz