Kenwood KDC-MP533V Instruction Manual

Kenwood KDC-MP533V Instruction Manual Manual pdf 12 page image

12 | EnglishTuner featuresStation Preset MemoryPutting a station in the memory.1 Select the bandPush the Control knob towards [FM] or [AM].2 Select the frequency to put in the memoryPush the Control knob towards [4] or[¢].3 Put the frequency in the memoryPress the desired [1] — [6] button for at least2 seconds.The preset number display blinks 1 time.On each band, 1 station can be put in thememory on each [1] — [6] button.Auto Memory EntryPutting stations with good reception in thememory automatically.1 Select the band for Auto Memory EntryPush the Control knob towards [FM] or [AM].2 Open Auto Memory EntryPress the [AME] button for at least 2 seconds."A-MEMORY" is displayed.When 6 stations that can be received are put inthe memory Auto Memory Entry closes.Preset TuningRecalling the stations in the memory.1 Select the bandPush the Control knob towards [FM] or [AM].2 Recall the stationPress the desired [1] — [6] button.Frequency Step SettingChanging the tuning frequency step.The original setting is 50 kHz for FM band, and 9kHz for AM band.1 Turn the power OFFPress the [SRC] button for at least 1 second.2 Switch the frequency stepWhile pressing the [1] and [5] buttons, pressthe [SRC] button.Release the [SRC] button first, after the displayappears, release your fingers from the [1] and [5]buttons.The frequency step changes to 200 kHz for FMband, and 10 kHz for AM band.• When the same operation is repeated, the frequencystep returns to the original setting.• When the frequency step is changed, the frequenciesin the memory are deleted.