38 | EnglishSIRIUS tuner control featuresCategory and Channel SearchSelecting the channel and category you want toreceive.1 Enter Category and Channel Search modePress the Control knob.2 Select the CategoryPush the Control knob towards [FM] or [AM].• It is the item when the category of Middle text displaypart is selected.3 Select the ChannelPush the Control knob towards [4] or[¢].• You cannot Channel search until the categoryinformation is acquired.Cancelling Category and Channel SearchmodePress the Control knob.Function of remote controlDirect Access TuningEntering the channel and tuning.1 Enter Direct Access Tuning modePress the [DIRECT] button on the remotecontrol.2 Enter the channelPress the number buttons.3 Do Channel SearchPush the Control knob towards [4] or[¢].Cancelling Direct Access TuningPress the [DIRECT] button on the remotecontrol.• If you make no button operation for 10 seconds, theDirect Access Tuning mode is automatically canceled.• You can set up until Channel number 223.• If there is no signal in the input Channel, "No Channel"appears. (KTC-SR901: optional accessory)• You cannot search for a channel number which is notbroadcasting.(KTC-SR902/KTC-SR903: optional accessory)• If you cannot receive any signal in the input Channeldue to bad conditions on radio wave or other suchproblems, "Acquiring Signal" appears.Selecting the Preset BandPush the Control knob toward [FM].Each time you push the knob, the preset bandalternates between the SR1, SR2, SR3 and SR4.Channel Preset MemoryPutting the channel in the memory.1 Select the preset bandPush the Control knob toward [FM].2 Select the channel to put in the memoryPush the Control knob towards [4] or[¢].3 Select the key function sectionPress the [NEXT] button.Repeatedly press the button until "[1]" — "[6]" aredisplayed above the [1] — [6] buttons.Refer to (page 11).4 Put the channel in the memoryPress the desired [1] — [6] button for at least2 seconds.The preset number display blinks 1 time.On each band, you can put 1 channel in thememory on each [1] — [6] button.• Only the channel number is stored. Categoryinformation is not stored.