Kenwood KDC-U40R Instruction Manual

Also see for KDC-U30R: Instruction manual

Contents

8Adjust [SETTINGS] mode settingsWhile listening to the radio...1 Press the volume knob to enter [FUNCTION] mode.2 Turn the volume knob to select [SETTINGS], then press to enter.3 Turn the volume knob to make a selection, then press to confirm.See table below for selection.4 Hold to finish the procedure.Item Selectable setting (Preset: *)LO.SEEK LO.S ON: Searches only FM stations with good reception. ; LO.S OFF *: Cancels.SEEKMODE Selects the tuning mode for 4 / ¢ buttons.AUTO1 *: Automatically search for a station. ; AUTO2: Search in the order of the stations in the presetmemory. ; MANUAL: Manually search for a station.A-MEMORY / N *: Automatically starts memorizing 6 stations with good reception. ; Y /: Cancels (automaticmemorizing is not activated). (Selectable only if [TYPE NML] is selected for [PRESET].) (page 6, 7)MONO SET MONO ON: Improve the FM reception (but the stereo effect may be lost). ; MONO OFF *: Cancels (stereoeffect resumes).PTY SRCH Selects the available Program Type (see table on page 9). Then, press 4 / ¢ to start searching.Press the volume knob to enter PTY language selection. Turn the volume knob to select the PTY language(ENGLISH */ FRENCH/ GERMAN), then press to confirm.TI TI ON: Allows the unit to temporarily switch to Traffic Information. ; TI OFF *: Cancels.NEWS SET NEWS 00M – NEWS 90M: Sets the time for receiving the next news bulletin. ; NEWS OFF *: Cancels.AF SET AF ON *: Automatically searches for another station broadcasting the same program in the same Radio DataSystem network with better reception when the current reception is poor. ; AF OFF: Cancels.Listening to the radio1 Press SRC to select “TUNER.”2 Press (BAND) repeatedly to select a band (FM1/ FM2/ FM3/ MW/ LW).“F1” / “F2” / “F3” / “MW” / “LW” appears on the display.3 Press 4 / ¢ to search for a station.Hold for about 2 seconds to memorize the current station.Press briefly to recall memorized station.