Kenwood KDC-U463 Instruction Manual

Contents

10AUXPreparation:Select [ON] for [BUILT-IN AUX]. ( 5)Start listening1 Connect a portable audio player (commerciallyavailable).2 Press repeatedly to select AUX.3 Turn on the portable audio player and startplayback.Set the AUX nameWhile listening to a portable audio player connected tothe unit...1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to select [SYSTEM], thenpress the knob.3 Turn the volume knob to select [AUX NAME SET],then press the knob.4 Turn the volume knob to make a selection, thenpress the knob.AUX (default)/ DVD/ PORTABLE/ GAME/ VIDEO/ TV5 Press and hold to exit.To return to the previous setting item, press .Auxiliary input jackPortable audioplayer3.5 mm stereo mini plug with “L” shapedconnector (commercially available)AUDIO SETTINGSWhile listening to any source...1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to select [AUDIO CONTROL], then press the knob.For / / / / / // : Pressing AUD enters [AUDIO CONTROL] directly.3 Turn the volume knob to make a selection (see the following table), then press theknob.4 Repeat step 3 until the desired item is selected or activated.5 Press and hold to exit.(or using RC-406)1 Press AUD to enter [AUDIO CONTROL].2 Press J / K to make a selection, then press .To return to the previous setting item, press .Default: XXSUB-W LEVEL –15 to +15 (0) Adjusts the subwoofer output level.BASS LEVEL –8 to +8 (+6)Adjusts the level to memorize for each source. (Before making an adjustment,select the source you want to adjust.)MID LEVEL –8 to +8 (+5)TRE LEVEL –8 to +8 (0)EQ PROBASS ADJUST BASS CTR FRQ 60/ 80/ 100/ 200 or 60HZ/ 80HZ/ 100HZ/ 200HZ: Selects the centerfrequency.BASS LEVEL –8 to +8 (+6): Adjusts the level.BASS Q FACTOR 1.00/ 1.25/ 1.50/ 2.00: Adjusts the quality factor.BASS EXTEND ON: Turns on the extended bass. ; OFF: Cancels.MID ADJUST MID CTR FRQ 0.5K/ 1.0K/ 1.5K/ 2.5K or 0.5KHZ/ 1.0KHZ/ 1.5KHZ/ 2.5KHZ: Selects thecenter frequency.MID LEVEL –8 to +8 (+5): Adjusts the level.MID Q FACTOR 0.75/ 1.00/ 1.25: Adjusts the quality factor.