Kenwood KDC-U556BT Instruction Manual

Also see for KDC-U556BT: Service manual

Contents

12AUDIO SETTINGSWhile listening to any source...1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to select [AUDIO CONTROL], then press the knob.3 Turn the volume knob to make a selection (see the following table), thenpress the knob.Repeat step 3 until the desired item is selected or activated.4 Press and hold to exit.(or using RC-406)1 Press AUD to enter [AUDIO CONTROL].2 Press 5/∞ to make a selection, then press ENT 38.• To return to the previous hierarchy, press .Default: XXSUB-W LEVEL –15 to +15 (0): Adjusts the subwoofer output level.BASS LEVEL –8 to +8 (+8): Adjusts the level to memorize for each source. (Beforemaking an adjustment, select the source you want toadjust.)MID LEVEL –8 to +8 (+2):TRE LEVEL –8 to +8 (+3):EQ PROBASS ADJUST BASS CTR FRQ 60/ 80/ 100/ 200: Selects the center frequency.BASS LEVEL –8 to +8 (+8): Adjusts the level.BASS Q FACTOR 1.00/ 1.25/ 1.50/ 2.00: Adjusts the quality factor.BASS EXTEND ON: Turns on the extended bass. ; OFF: Cancels.MID ADJUST MID CTR FRQ 0.5K/ 1.0K/ 1.5K/ 2.5K: Selects the center frequency.MID LEVEL –8 to +8 (+2): Adjusts the level.MID Q FACTOR 0.75/ 1.00/ 1.25: Adjusts the quality factor.TRE ADJUST TRE CTR FRQ 10.0K/ 12.5K/ 15.0K/ 17.5K: Selects the centerfrequency.TRE LEVEL –8 to +8 (+3): Adjusts the level.PRESET EQ NATURAL/ USER/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ POWERFUL:Selects a preset equalizer suitable to the music genre. (Select [USER] touse the customized bass, middle, and treble settings.)BASS BOOST B.BOOST LV1/ B.BOOST LV2/ B.BOOST LV3: Selects your preferredbass boost level. ; OFF: Cancels.LOUDNESS LOUDNESS LV1/ LOUDNESS LV2: Selects your preferred low and highfrequencies boost to produce a well-balanced sound at a low volumelevel. ; OFF: Cancels.BALANCE L15 to R15 (0): Adjusts the left and right speaker output balance.FADER R15 to F15 (0): Adjusts the rear and front speaker output balance.SUBWOOFER SET ON: Turns on the subwoofer output. ; OFF: Cancels.DETAILED SETHPF THROUGH: All signals are sent to the speakers. ; 100HZ/ 120HZ/150HZ: Audio signals with frequencies higher than 100 Hz/ 120 Hz/150 Hz are sent to the speakers.LPF SUBWOOFER THROUGH: All signals are sent to the subwoofer. ; 85HZ/ 120HZ/160HZ: Audio signals with frequencies lower than 85 Hz/ 120 Hz/160 Hz are sent to the subwoofer.SUB-W PHASE REVERSE (180°)/ NORMAL (0°): Selects the phase of the subwooferoutput to be in line with the speaker output for optimum performance.(Selectable only if a setting other than [THROUGH] is selected for[LPF SUBWOOFER].)SUPREME SET ON: Creates realistic sound by interpolating the high-frequencycomponents that are lost in MP3/WMA audio compression. ;OFF: Cancels. (Selectable only when playing back an MP3/WMA disc ora USB device, except iPhone/iPod.)VOLUME OFFSET(Default: 0)–8 to +8 (for AUX) ; –8 to 0 (for other sources): Presets the volumeadjustment level of each source. (Before adjustment, select the sourceyou want to adjust.)