Kenwood KDC-U563BT Instruction Manual

Contents

Kenwood KDC-U563BT Instruction Manual Manual pdf 5 page image

ENGLISH 5GETTING STARTEDSYSTEMKEY BEEP ON: Activates the keypress tone. ; OFF: Deactivates.TDF ALARM ON: Activates the alarm if you forget to detach thefaceplate when ACC is set to OFF. ;OFF: Deactivates.SOURCE SELECTPANDORA SRC ON: Enables PANDORA in source selection. ;OFF: Disables. ( 9)BUILT-IN AUX ON: Enables AUX in source selection. ; OFF: Disables.( 16)CD READ 1: Automatically distinguishes between audio file discand music CD. ; 2: Forces to play as a music CD. Nosound can be heard if an audio file disc is played.F/W UPDATEUPDATE SYSTEM / UPDATE BTF/W UP xx.xx YES: Starts upgrading the firmware. ; NO: Cancels(upgrading is not activated).For details on how to update the firmware, see:www.kenwood.com/cs/ce/CLOCKCLOCK DISPLAY ON: The clock time is shown on the display even whenthe unit is turned off. ; OFF: Cancels.RADIOSearch for a station1 Press repeatedly to select TUNER.2 Press repeatedly (or press / on RC-406) to select FM1/FM2/ FM3/ AM/ SW1/ SW2.3 Press S / T (or press S / on RC-406) to search for a station.• To change the searching method for S / T: Press repeatedly.AUTO1 : Automatically search for a station.AUTO2 : Search for a preset station.MANUAL : Manually search for a station.• To store a station: Press and hold one of the number buttons (1 to 6).• To select a stored station: Press one of the number buttons (1 to 6) (or press one ofthe number buttons (1 to 6) on RC-406).Direct Access Tuning (using RC-406)1 Press DIRECT to enter Direct Access Tuning.“– – – • –” (for FM), “– – – –” (for AM/ SW1) or “– – – – –” (for SW2) appears on thedisplay.2 Press the number buttons to enter a frequency.3 Press to search for a station.• To cancel, press or DIRECT.• If no operation is done for 10 seconds after step 2, Direct Access Tuning isautomatically canceled.