Kenwood KDC-W237 Instruction Manual

English | 25⁄• Texts displayed using Russian characters are as follows.- Folder name/ File name/ Song title/ Artist name/Album name- CD text (internal CD source)• Texts cannot distinguish upper case and lower case inRussian characters.In Standby modeBuilt-in Auxiliary input SettingSet the Built-in Auxiliary Input function.Display Setting"AUX OFF" When selecting the source there’s no Auxiliary Input."AUX ON1" When selecting the source there’s Auxiliary Input."AUX ON2" When the unit is turned on by AUX source, the attenuatorfunction is activated. Press [ATT] button to cancel theattenuator function in order to listen to the externalequipment. there’s Auxiliary Input.⁄• Setting to "AUX ON2" will not output the noise which isproduced when an external equipment is not connectedto the AUX terminal.In Standby modePower OFF TimerSetting the timer to turn this unit’s power OFFautomatically when Standby mode continues.Using this setting can save the vehicle’s batterypower.Display Setting"OFF – – –" Power OFF Timer function is OFF."OFF 20M"(Original setting)Turns the power OFF after 20 minutes."OFF 40M" Turns the power OFF after 40 minutes."OFF 60M" Turns the power OFF after 60 minutes.In Standby modeCD Read SettingWhen there is a problem with playing a CD withspecial format, this setting plays the CD by force.Display Setting"CD READ1" Play CD and Audio file."CD READ2" Play CD by force.⁄• Some music CDs may not play even in the "CD READ2"mode.In Standby modeDemonstration mode SettingSets the demonstration mode.1 Select the Demonstration modePush the Control knob towards [FM] or [AM].Select the "DEMO" display.2 Set the Demonstration modePress the Control knob for at least 2 seconds.Each time you press the knob at least 2 seconds,the Demonstration mode alternates between thesettings shown in the table below.Display Setting"DEMO ON" The Demonstration mode function is ON."DEMO OFF" Exit Demonstration mode (Normal mode).