Kenwood KDC-W237S Instruction Manual

Also see for KDC-241: Instruction manual

Contents

Kenwood KDC-W237S Instruction Manual Manual pdf 10 page image

10 | KDC-W237SMenu OperationMenu SystemSetting various functions.1 Enter Menu modePress the [B.BOOST] button for at least 1second.“MENU” is displayed.2 Select the menu itemPress the top or bottom side of the Controlknob.Display Setting Setting overview Source“CLK ADJ” Refer topage 10Sets the clock.“SYNC” ON*/OFF Synchronizing the RDS stationtime data and this unit’s clock.“DIM” ON/OFF* Adjusts the brightness ofthe display according to thesurrounding illumination.“SWPRE” R*/ SW Sets the preout output.“SPRM” ON*/OFF Turns ON/OFF the Supremefunction.“NEWS” OFF*– 90MTurns ON/OFF the News BulletinAutomatic Reception functionand sets the news bulletininterrupt disabled time.“LO.S” ON/OFF* Only stations whose reception isgood are searched in auto seektuning.“AUTO1”/”AUTO2”/”MANU”“AUTO1”*/”AUTO2”/”MANU”Selects the tuning mode ofthe radio.“AF” ON*/OFF When station reception is poor,automatically switches to thestation that is broadcasting thesame program over the same RDSnetwork.“REG” ON*/OFF Sets whether to switch to thestation only in the specific regionusing the “AF” control.“ATPS” ON*/OFF When traffic information stationreception is poor, automaticallysearches for a station that can bereceived better.“MONO” ON/OFF* Receives a stereo broadcast in themono mode.“NAME SET” Refer topage 11Sets the display when switchedto AUX source.“SCL” AUTO/MANU*Specifies whether the text isscrolled automatically.“AUX” OFF/ON1*/ON2Sets whether to display AUXduring source selection.Display Setting Setting overview Source“OFF” OFF – 60M Turns off the power when thepreset time has lapsed in theStandby mode.“CD READ” 1*/2 Sets the CD read mode.“DEMO” Refer topage 11Specifies whether to enabledemonstration.* Factory setting: Can be set in standby state.: Can be set in other than standby state.: Can be set while Audio file source.: Can be set while Tuner source.: Can be set during FM reception.: Can be set while accessing AUX source.⁄• Refer to the respective page for information on how toset the items with reference page number.• Refer to the (page 12) for the details of themenu items.3 Set the menu itemPress the right or left side of the Control knob.4 Exit Menu modePress the [B.BOOST] button.Manual Clock Adjustment1 Enter Menu modePress the [B.BOOST] button for at least 1second.“MENU” is displayed.2 Select Clock Adjustment modePress the top or bottom side of the Controlknob.Select the “CLK ADJ” display.3 Enter Clock Adjust modePress the center of the Control knob for at least1 second.The clock display blinks.4 Adjust the hoursPress the top or bottom side of the Controlknob.Adjust the minutesPress the right or left side of the Control knob.5 Exit Clock adjustment modePress the [B.BOOST] button.