Kenwood KDC-W241 Instruction Manual

Also see for KDC-241: Instruction manual

Contents

Kenwood KDC-W241 Instruction Manual Manual pdf 11 page image

English | 11Auxiliary Input Display SettingSelecting the display when changing to Auxiliaryinput source.1 Select Auxiliary input sourcePress the [SRC] button.Select the “AUX” display.2 Enter Menu modePress the [B.BOOST] button for at least 1second.“MENU” is displayed.3 Select Auxiliary input display setting modePress the top or bottom side of the Controlknob.Select the “NAME SET” display.4 Enter Auxiliary input display setting modePress the center of the Control knob for at least1 second.The presently selected Auxiliary input display isdisplayed.5 Select the Auxiliary input displayPress the right or left side of the Control knob.Each time you push the knob, the display alternatesas listed below.• “AUX”• “DVD”• “PORTABLE”• “GAME”• “VIDEO”• “TV”6 Exit Auxiliary input display setting modePress the [B.BOOST] button.⁄• When operation stops for 10 seconds, the name at thattime is registered, and the Auxiliary input display settingmode closes.Demonstration mode SettingSets the demonstration mode.1 Select the Demonstration modePress the top or bottom side of the Controlknob.Select the “DEMO” display.2 Set the Demonstration modePress the center of the Control knob for at least2 seconds.Each time you press the knob at least 2 seconds,the Demonstration mode alternates between thesettings shown in the table below.Display Setting“DEMO ON” The Demonstration mode function is ON.“DEMO OFF” Exit Demonstration mode (Normal mode).⁄• You can do this adjustment when the “SYNC” is set as“OFF”.