English | 21In Standby modeManual Clock Adjustment• You can do this adjustment when the Clock> (page 21) is set as OFF.1 Select Clock Adjustment modePush the Control knob towards [FM] or [AM].Select the "CLK ADJ" display.2 Enter Clock Adjust modePress the Control knob for at least 1 second.The clock display blinks.3 Adjust the hoursPush the Control knob towards [FM] or [AM].Adjust the minutesPush the Control knob towards [4] or[¢].4 Exit Clock adjustment modePress the [MENU] button.In Standby modeSynchronize ClockSynchronizing the RDS station time data and thisunit’s clock.Display Setting"SYNC ON" Synchronizes the time."SYNC OFF" Adjust the time manually.• It takes 3 to 4 minutes to synchronize the clock.In Audio file sourceSupreme SettingWhen MP3 or WMA files encoded at a low bitrate (less than 96kbps (fs=32k, 44.1k, 48kHz))are played, this function restores their highfrequency region to approach the sound qualityof equivalents of these files encoded at a high bitrate. Processing is optimized for the compressionformat used (MP3, or WMA), and adjustment ismade for the bit rate used.Display Setting"SPRM ON" Plays sound using the Supreme function."SPRM OFF" Plays the original sound stored in the audio file.• The sound effect may be imperceptible dependingon the relationship between the audio file format andsetting.In Standby modeTouch Sensor ToneSetting the operation check sound (beep sound)ON/OFF.Display Setting"BEEP ON" Beep is heard."BEEP OFF" Beep canceled.
