|
English | 13Station Preset MemoryPutting a station in the memory.1 Select the bandPush the Control knob towards [FM] or [AM].2 Select the frequency to put in the memoryPush the Control knob towards [4] or[¢].3 Put the frequency in the memoryPress the desired [1] — [6] button for at least2 seconds.The preset number display blinks 1 time.On each band, 1 station can be put in thememory on each [1] — [6] button.Auto Memory EntryPutting stations with good reception in thememory automatically.1 Select the band for Auto Memory EntryPush the Control knob towards [FM] or [AM].2 Open Auto Memory EntryPress the [AME] button for at least 2 seconds.When 6 stations that can be received are put inthe memory Auto Memory Entry closes.• When the (page 23) isON, only RDS stations are put in the memory.• When Auto Memory Entry is done in the FM2 band,the RDS stations preset in the FM1 band are not put inthe memory.Likewise, when Auto Memory Entry is done in the FM3band, RDS stations preset in FM1 or FM2 are not putin the memory.Preset TuningRecalling the stations in the memory.1 Select the bandPush the Control knob towards [FM] or [AM].2 Recall the stationPress the desired [1] — [6] button. PreviousNext |