|
6 | EnglishNotesAbout DAB Tuner controlRefer to A group on the Instruction manual of DABTuner KTC-9090DAB (optional accessory) for thecontrol method of DAB Tuner function.However, the following control methods of thefunction for this unit may be differed from theInstruction manual; therefore, refer to the followingsupplemental instruction.1. Select the preset band for Auto Ensemble MemoryEntry.2. Press the [AME] button for at least 2 seconds.Open Auto Ensemble Memory Entry.After storing in the memory finishes, the numberof the pre-set buttons and the ensemble label aredisplayed.and in Type (PTY) Function>At the operation to press [DISP] button, use [TI]button instead.This Product is not installed by the manufacturer of avehicle on the production line, nor by the professionalimporter of a vehicle into an EU Member State.Information on Disposal of Old Electricaland Electronic Equipment (applicable forEU countries that have adopted separatewaste collection systems)Products with the symbol (crossed-outwheeled bin) cannot be disposed ashousehold waste.Old electrical and electronic equipmentshould be recycled at a facility capableof handling these items and their wastebyproducts. Contact your local authorityfor details in locating a recycle facilitynearest to you. Proper recycling and wastedisposal will help conserve resources whilstpreventing detrimental effects on ourhealth and the environment.The marking of products using lasers(Except for some areas)CLASS 1LASER PRODUCTThe label is attached to the chassis/case and saysthat the component uses laser beams that have beenclassified as Class 1. It means that the unit is utilizinglaser beams that are of a weaker class. There is nodanger of hazardous radiation outside the unit.
|
