10 | KDC-W6641U/ KDC-W6541U/ KDC-W6141U/ KDC-W6041UDisc Naming (DNPS)Attaching a title to a CD.1 Play the disc you want to attach a name to2 Select Name set mode item during MenumodeSelect the “Name Set” display.For how to select Function Control items, refer to (page 6).3 Enter Name set modePress the Control knob for at least 1 second.4 Enter the nameOperation type OperationMove the cursor to the entercharacter positionPush the Control knob towards rightor left.Select the character type* Press the Control knob.Select the characters Turn the Control knob or push ittowards up or down.* Each time you press the knob, the character typealternates between the types shown in the table below.Character type Alphabet upper caseAlphabet lower caseNumbers and symbolsSpecial characters (Accent characters)⁄• Enter characters by using a remote control with numbersbuttons.Example: If you are entering “DANCE”.Character “D” “A” “N” “C” “E”Button [3] [¢] [2] [¢] [6] [¢] [2] [¢] [3]Times pressed 1 1 2 3 25 Exit Menu modePress the [FNC] button.⁄• A title cannot be attached to Audio file media.• When operation stops for 10 seconds the name at thattime is registered, and Name Set mode closes.• Media that you can attach a name to- Internal CD player: 10 discs- External CD changer/ player: Varies according to theCD changer/ player. Refer to the CD changer/ playermanual.• You can change the name of a CD by the sameoperation you used to name it.Display SettingsFunction of KDC-W6541U/ KDC-W6641UKey Color SelectionSelecting the Key (Button) color.1 Enter Key Color Selection modeSelect “K-COL” .For how to select Function Control item, refer to (page 6).2 Select the Key ColorBasic colorTurn the Control knob or push it towards leftor right.“Variable Scan”/ “Color1” — “Color10”/ “User”Detail color (RGB-based adjustment)Operation type OperationTo select the detail coloradjustment mode.Press the Control knob for at least1 second.To select the color to adjust.(red, green, or blue)Push the Control knob towards rightor left.To adjust color. (Range: 0 – 9) Turn the Control knob or push ittowards up or down.To exit the detail coloradjustment mode.Press the Control knob.3 Exit Key Color Selection modePress the [FNC] button.⁄• When colors are adjusted in the detail color mode, thevalues set with “User” selected in the basic color modeare used.• In the basic color mode, selecting “Variable Scan” scansbasic colors. During scanning, you cannot adjust detailcolors.