Kenwood KDC-W7534U Instruction Manual

Also see for KDC-W7534U: Service manual

Kenwood KDC-W7534U Instruction Manual Manual pdf 47 page image

English | 47Connecting Wires to TerminalsMUTEEXT.CONTP.CONTANT.CONT1234567812345678FRONTSUBWOOFERAUX INREARRear right output (Red)Rear left output (White)Front left output (White)Front right output (Red)Battery wire (Yellow)Ignition wire (Red)FM/AM antenna inputAntenna Cord (ISO)Antenna Conversion Adaptor(ISO–JASO) (Accessory3)To connect the Kenwood navigation system, consultyour navigation manual.Wiring harness(Accessory1)If no connections are made, do notlet the wire come out from the tab.Power control/Motor antennacontrol wire (Blue/White)TEL mute wire (Brown)Connect either to the power control terminalwhen using the optional power amplifier, or to theantenna control terminal in the vehicle.Connect to the terminal that is grounded wheneither the telephone rings or during conversation.A-–7 Pin (Red)A–4 Pin (Yellow)Connector AConnector BFuse (10A)See next pageTo External Display/Steering remoteExternal amplifier control wire(Pink/Black) To "EXT.AMP.CONT." terminal of the amplifierhaving the external amp control function.To Kenwood disc changer/External optional accessory To connect these leads, refer tothe relevant instruction manuals.AUX right input (Red)AUX left input (White)Sub Woofer right output (Red)Sub Woofer left output (White)USB connectorDo not remove the capwhen you do not use theUSB cable. The connectorwill cause the unit tomalfunction if it gets intouch with any metallic partof the vehicle.To USB device