Kenwood KDC-X303 Instruction Manual

Also see for KDC-BT23: Quick start guide Instruction manual

Kenwood KDC-X303 Instruction Manual Manual pdf 34 page image

30 ENGLISHLEARNING STEERING REMOTE CONTROL (for )You can control the unit with the steering remote control keys on yourvehicle. After connection, you can configure the control keys according toyour preference.• You can only make this configuration if your vehicle is equipped with theelectrical steering remote control.• If the steering remote control in your car is not compatible, configurationmay not be completed and an error message may appear. (Page 35)Make the connectionConfigure the control keys1 Press B SRC repeatedly to enter STANDBY.2 Press the volume knob to enter [FUNCTION].3 Turn the volume knob to select [SYSTEM], then press the knob.4 Turn the volume knob to select [USER S.REMO], then press the knob.5 Turn the volume knob to select [SET KEY], then press the knob.A key list of 16 assignable keys appears.• [K## NONE]: No function has been assigned.6 Turn the volume knob to select any key from the key list to assign thefunction, then press the knob.“PRESS KEY TO ASSIGN K##” appears.7 Press and hold any control keys on your steering remote controlwhich you want to assign.A list of key functions will appear on the display.[NONE] (default)/[ATT]/[SEEK UP]/[SEEK DOWN]/[VOL UP]/[VOL DOWN]/[MODE]/[ON HOOK]/[OFF HOOK]/[VOICE]/[ENTER]8 Turn the volume knob to select a function to assign, then press theknob.The selected key function is assigned to the steering remote control keyyou have selected in step 7.The display returns to the key list as on step 5.• [K## (Function)]: When certain function has been assigned to a key.9 Repeat steps 6, 7 and 8 to assign other control keys.10 Press and hold to exit.To reassign the control keys1 Press B SRC repeatedly to enter STANDBY.2 Press the volume knob to enter [FUNCTION].3 Turn the volume knob to select [SYSTEM], then press the knob.4 Turn the volume knob to select [USER S.REMO], then press the knob.5 Turn the volume knob to select [RESET KEY], then press the knob.6 Turn the volume knob to select [YES], then press the knob.All the control keys will be reset.Selecting [NO] will cancel the operation.To return to the previous setting item, press .When [FACTORY RESET] is set to [YES] (page 5), it will also reset the learningsteering remote control.Steering remote cable (supplied)Learning steeringremote inputterminalRear panelGray/redBright green/redPurple/redConnect to yourvehicle’s steeringremote harness.Contact yourKENWOOD dealerfor details.JS_KWD_KDC_X303_KN_EN_6th.indd 30 4/6/2018 11:26:43 AM