Kenwood KDC-X396 Instruction Manual

Also see for KDC-202U: Instruction manual Installation instructions Instruction manual Service manual

Kenwood KDC-X396 Instruction Manual Manual pdf 7 page image

7ENGLISHGetting startedCanceling the display demonstration (except for )The display demonstration is always turned on unless you cancel it.When you turn on the power (or after you reset the unit), the display shows:[CANCEL DEMO] \ [PRESS] \ [VOLUME KNOB]1 Press the volume knob.[YES] is selected as the initial setup.2 Press the volume knob again to confirm.[DEMO OFF] appears.If no operation is done for about 15 seconds or if you turn the volume knob to select [NO] instep 2, [DEMO MODE] appears and the display demonstration starts.Setting the demonstration mode1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to select [DEMO MODE], then press to enter.3 Turn the volume knob to select [ON] or [OFF].If [ON] is selected, display demonstration starts if no operation is done for about20 seconds.4 Hold to finish the procedure.Main unit Remotecontroller General operationSCRL DISP —Changes the display information.Scrolls the display information if pressed and held.Enters clock adjustment mode directly (page 8) if pressed andheld while in clock display screen.iPod —For :Selects “iPod” source.Enters the controlling mode (MODE ON/ MODE OFF) for iPodplayback if pressed and held. (page 12)— For :Selects Random Play. (page 11)— AUD Enters [AUDIO CONTROL] / [AUDIO CTRL] settings directly.— ATT Attenuates the sound.• To return to the previous level, press the button again.Returns to the previous item.EXIT Exit from setting mode. (Press and hold on the main unit willalso exit from the setting mode.)Continued...