5ENGLISH |HD Radio™ tunerYou can tune in to both conventional and HD Radio broadcasts.• To find HD Radio stations in your area, visit.Search for a station or channel1 Press B SRC to select HD RADIO.2 Press J BAND repeatedly (or press *AM– / #FM+ on RC-406)to select FM1/ FM2/ FM3/ AM.3 Press S / T (or press S / T (+) on RC-406) to search fora station or channel.• To change the searching method for S / T: Press K SEEKrepeatedly.AUTO1: Automatically search for a station or channel.AUTO2: Search for a preset station or channel.MANUAL: Manually search for a station or channel.• To store a station or channel: Press and hold one of the numberbuttons (1 to 6).• To select a stored station or channel: Press one of the numberbuttons (1 to 6) (or press one of the number buttons (1 to 6) onRC-406).Select an HD Radio multicast channelMany HD Radio stations offer more than one channel programming.This service is called multicasting. While receiving HD Radiomulticast channels....Press S / T to select your desired channel (HD1 to HD8).“LINKING” appears while linking to a multicast channel.Direct Access Tuning (using RC-406)1 Press DIRECT to enter Direct Access Tuning.2 Press the number buttons to enter a frequency or channel.3 Press ENT IW to search for a station or channel.• To cancel, press or DIRECT.• If no operation is done for 10 seconds after step 2, Direct Access Tuning isautomatically canceled.Other settings1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to make a selection (see the following table), thenpress the knob.3 Press and hold to exit.To return to the previous setting item or hierarchy, press .Default: XXTUNER SETTINGIF BAND AUTO: Increases the tuner selectivity to reduce interference noises from adjacentFM stations. (Stereo effect may be lost.) ; WIDE: Subjects to interference noisesfrom adjacent FM stations, but sound quality will not be degraded and the stereoeffect will remain.AUTOMEMORYYES: Automatically starts memorizing 6 stations with good reception. ; NO: Cancels.(Selectable only if [NORMAL] is selected for [PRESET TYPE].) ( 4)RECEIVEMODESets the receive mode of the HD Radio receiver.AUTO : Automatically tunes to analog broadcast when there is no digitalbroadcast. ; DIGITAL: Tunes in to digital broadcast only. ; ANALOG: Tunes in toanalog broadcast only.TAG MEMORY Displays the shared tag memory usage of the HD Radio receiver.00 — 50: Up to 50 tags can be registered to this unit.CLOCKTIME SYNC ON: Synchronizes the unit’s time to the Radio Broadcast Data System station time. ;OFF: Cancels.
