Kenwood KDC-X615 Service Manual

Also see for KDC-515S: Instruction manual Instruction manual

Contents

Kenwood KDC-X615 Service Manual Manual pdf 8 page image

KDC-X615,6015KDC-6080R/RY/RV,70168TEST MODE•TEST MODE SPECIFICATIONS(1) How to enter the test modeWhile holding the FM and Preset 6 keys simultaneously,reset the unit.All indicators and display segments are ON at the startof test mode.(2) How to exit from the test modeReset the unit.(Note) The test mode cannot be canceled by turningAcc OFF, power OFF or momentary power down.(3) Test mode specifications of the CD receiverEach press of the Track Up key jumps to the followingtracks.No. 9 ⇒No. 15 ⇒ No. 10 ⇒No. 11 ⇒ No. 12 ⇒ No. 13⇒No. 14⇒No. 9 (return to beginning)Pressing the Track Down key jumps to the previous trackto the track being played.(4) Audio•The volume is -10 dB (displayed as 30).• LOUD is OFF, and CRSC is also OFF whether the func-tion is provided or not.• With the Bass/Treble and Balance/Fader controls,pressing the Up/Down key switch the setting alter-nately to:Full Boost ⇒ Full Cut ⇒ Full Boost, Full Right ⇒FullLeft⇒Full Right, or Full Front ⇒ Full Rear ⇒Full Front.• With the high-pass filter, pressing the Up key sets itto Through/100 Hz/200 Hz and pressing the Down keysets it to 200 Hz/100 Hz/Through.• Other adjustments function in the same way as nor-mal mode.(5) Backup current measurementWhen the unit is reset (backup turned on) while Acc isOFF or when Acc is turned OFF in test mode, the MUTEterminal goes on in 2 seconds, instead of 1.5 second.(The panel, CD, C and MD mechanisms are not acti-vated at this time.)(6) Security code registration after E2PROM replacementservicing (E/M type only)1. Enter the test mode. (See (1) How to enter the testmode.)2. Press the SRC key to set All OFF.3. Press and hold the AUDIO key for 1 second to entermenu mode.4. Press the FM/AM key to select "SECURITY".5. Press and hold the Track Up/Down for 2 seconds.6. Enter the code by pressing the Preset 1, 2, 3 and 4keys.Example: To enter "3510",• Press the Preset 1 key 4 times.• Press the Preset 2 key 6 times.• Press the Preset 3 key 2 times.• Press the Preset 4 key once.7. Press and hold the DISPLAY key for 3 seconds todisplay "APPROVED".8. Quit the test mode (See (2) How to exit from the testmode.)(7) How to clear the simple security code (K type only)1. While the code is requested, press and hold the DISPkey and press and hold the VOL Up key for 3 sec-onds.("----" disappears.)2. Enter "KCAR" from the remote control unit. (Sameoperation as the '98 model)• Press numeric key 5 twice then press the Track Upkey. (This enters "K".)• Press numeric key 2 three times then press the TrackUp key. (This enters "A".)• Press numeric key 2 once then press the Track Upkey. (This enters "A".)• Press numeric key 7 twice then press the Track Upkey. (This enters "R".)3. The security is canceled and the unit enters theTUNER mode.(8) Other• The DNPP/SBF key of the remote control unit (RC-510) functions as the menu mode ON/OFF key.• The OPEN/CLOSE key of the remote control unit (RC-510) functions as the audio adjustment mode ON/OFF key.• The menu is displayed by displaying only the requiredfeatures.• Message such as "CODE OFF" is not displayed whenpower is turned ON.• The contrast can be adjusted only to 0/5/10 using theUp/Down keys.