Kenwood KDC-X700BT Instrucion Manual

Contents

5ENGLISH |Search for a station1 Press B SRC to select TUNER.2 Press J BAND repeatedly (or press *AM– / #FM+ on RC-406) toselect FM1/ FM2/ FM3/ MW/ SW1/ SW2.3 Press S / T (or press S / T (+) on RC-406) to search for astation.• To change the searching method for S / T: Press K SEEKrepeatedly.AUTO1: Automatically search for a station.AUTO2: Search for a preset station.MANUAL: Manually search for a station.• To store a station: Press and hold one of the number buttons (1 to 6).• To select a stored station: Press one of the number buttons (1 to 6) (orpress one of the number buttons (1 to 6) on RC-406).Change the frequency stepsYou can change the frequency step of:FM: 50 kHz to 200 kHzMW: 9 kHz to 10 kHz1 Press and hold B SRC to turn off the power.2 While pressing number buttons 1 and 5, press B SRC.Release your fingers from the buttons after the display appears.• To restore the initial setting, repeat the same procedure.• When the frequency step is changed, the previously stored stations inthe memory are deleted.RADIODirect Access Tuning (using RC-406)1 Press DIRECT to enter Direct Access Tuning.2 Press the number buttons to enter a frequency.3 Press ENT IW to search for a station.• To cancel, press or DIRECT.• If no operation is done for 10 seconds after step 2, Direct Access Tuningis automatically canceled.Other settings1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to make a selection (see the following table),then press the knob.3 Press and hold to exit.To return to the previous setting item or hierarchy, press .Default: XXTUNER SETTINGLOCAL SEEK ON: Searches only MW/ SW1/ SW2 stations with good reception. ;OFF: Cancels.AUTO MEMORY YES: Automatically starts memorizing 6 stations with goodreception. ; NO: Cancels. (Selectable only if [NORMAL] is selected for[PRESET TYPE].) ( 4)MONO SET ON: Improves the FM reception, but the stereo effect may be lost. ;OFF: Cancels.NEWS SET ON: The unit will temporarily switch to News Programme if available. ;OFF: Cancels.REGIONAL ON: Switches to another station only in the specific region using the “AF”control. ; OFF: Cancels.