Kenwood KDC-X8006U Instruction Manual

Also see for KDC-X8006U: Firmware update guide Installation manual

English | 35non-Japanese carsFirewall or metal supportScrew (M4X8)(commercially available)Self-tapping screw(commercially available)Metal mounting strap(commercially available)Bend the tabs of themounting sleeve with ascrewdriver or similar utensiland attach it in place.⁄• Make sure that the unit is installed securely in place. If theunit is unstable, it may malfunction (for example, the soundmay skip).Japanese cars1 Refer to the section frame> and then remove the hard rubber frame.2 Align the holes in the unit (two locations on eachside) with the vehicle mounting bracket and securethe unit with the accessory screws.8 mmMAX.M5mm M5mm8 mmMAX.TN TNT/NT: Toyota carsN: Nissan carsAccessory3...for Nissan carAccessory4...for Toyota car3 4¤• During installation, do not use any screws except forthose provided. The use of different screws might result indamage to the main unit.• Damage may occur if a screwdriver or similar tool is usedwith excessive force during the installations.Installation