Kenwood KDC-X869 Instruction Manual

Also see for KDC-MP922: Service manual

Contents

Selecting the display when this device is switched to Auxiliaryinput source.1 Select Auxiliary input sourcePress the [SRC] button.Select the "AUX"/"AUX1" display.2 Enter Auxiliary input display setting modePress the [NAME.S] button for at least 2 seconds.The presently selected AUX Name is blinks.3 Select the Auxiliary input displayPress the [4] or [¢] button.Each time the button is pressed it switches through the belowdisplays.Auxiliary Input Display Setting6 Repeat steps 3 through 5 and enter the name.7 Exit name set modePress the [NAME.S] button.• When operation stops for 10 seconds the name at that time isregistered, and Name Set mode closes.• Memory numbers- FM: 32 stations- AM: 16 stations- Internal CD player: 30 discs- External CD changer/ player: Varies according to the CD changer/player. Refer to the CD changer/ player manual.• The title of station/CD can be changed by the same operationused to name it.Attaching a title to a Station or CD.1 Receive/play the station/disc you want to attach a title toA title can't be attached to MD.2 Enter name set modePress the [NAME.S] button for at least 2 seconds."Name Set" is displayed.3 Move the cursor to the enter character positionPress the [4] or [¢] button.4 Select the character typePress the [2] — [4] button.Each time the button is pressed the character type switches asshown below.Character type ButtonAlphabet (Upper case/ Lower case) [2] ("A • a")Numbers and symbols [3] ("1")Special characters (Accent characters) [4] ("CHAR")5 Select the charactersPress the [FM] or [AM] button.Characters can be entered by using a remote with a numberbuttons.Example: If "DANCE" is entered.Character Button Times pressed"D" [3] 1"A" [2] 1"N" [6] 2"C" [2] 3"E" [3] 2Station/Disc Naming (SNPS/DNPS)General features— 24 —English