Kenwood KDC-Z939 Instruction Manual

Also see for kdc-z939: Service manual

Calling up the stations in the memory.1 Select the bandPress the [FM] or [AM] button.2 Call up the stationPress the [#1] — [#6] button.Preset TuningPutting a station with good reception in the memoryautomatically.1 Select the band for Auto Memory EntryPress the [FM] or [AM] button.2 Enter Menu modePress the [MENU] button for at least 1 second."MENU" is displayed.3 Select the Auto Memory Entry modePress the [FM] or [AM] button.Select the "Auto Memory" display.4 Open Auto Memory EntryPress the [4] or [¢] button for at least 2 seconds.When 6 stations that can be received are put in the memoryAuto Memory Entry closes.• When the (page 37) is ON, only RDS stations areput in the memory.• When Auto Memory Entry is done in the FM2 band, the RDSstations preset in the FM1 band aren't put in the memory.Likewise, when it is done in the FM3 band, RDS stations preset inFM1 or FM2 aren't put in the memory.Auto Memory EntryPutting the station in the memory.1 Select the bandPress the [FM] or [AM] button.2 Select the frequency to put in the memoryPress the [4] or [¢] button.3 Put the frequency in the memoryPress the [#1] — [#6] button for at least 2 seconds.The preset number display blinks 1 time.On each band, 1 station can be put in the memory on each [#1]— [#6] button.Station Preset Memory— 21 —Entering the frequency and tuning.1 Select the bandPress the [FM] or [AM] button.2 Enter Direct Access Tuning modePress the [DIRECT] button on the remote."– – – –" is displayed.3 Enter the frequencyPress the number buttons on the remote.Example:Desired frequency Press button92.1 MHz (FM) [#0], [#9], [#2], [#1]810 kHz (AM) [#0], [#8], [#1], [#0]Canceling Direct Access TuningPress the [DIRECT] button on the remote.Direct Access Tuning (Function of remote)