English | 13Tuner OperationListening to radio stations1 Press [SRC] to select the tuner.2 Press [BAND] repeatedly to select a band.The indicator lights in the following order.F1 (FM1)—F2 (FM2)—F3 (FM3)— MW (MW)3 Auto Search: Press [2]/[3] ([2]/[3] on theremote control).“SEARCH” appears in the display.When a station is received, searching stops.4 Manual Search: Press and hold [2]/[3]([2]/[3] on the remote control) until“MANUAL” appears, and then press itrepeatedly.The frequencies move up or down step by step.⁄• When not operated for 6 seconds after manual search,the auto search tuner display is shown.Storing broadcast frequenciesYou can easily store up to 6 broadcast frequenciesfor later recall at the touch of a button.1 Press [BAND] to select desired band you wantto store.2 Select the desired frequency.3 Press one of preset buttons [1] to [6] and holduntil the beep sound.The number you have pressed will be displayedin the preset number indicator and then remainlit. The selected radio station frequency has beenstored in memory.4 Repeat steps 1 to 3 to preset other stations.The next time, you press the same preset button,the radio station frequency is recalled from thememory.⁄• Up to 18 FM stations, 6 for each of 3 FM bands and 6MW stations can be stored in the memory.• When a new station is stored in the preset stationbutton, the previously preset station is automaticallyerased.Auto search memoryThis function lets you automatically store the 6strongest broadcast frequencies.1 Press [5].The 6 strongest broadcast frequencies will bestored under preset buttons 1 to 6 in the order oftheir signal strength.2 To cancel, press [5].To scan the preset stations1 Press [∞].Each preset station appears.2 To cancel, press [∞].To tune in the preset stations1 Press [BAND] to select the desired band.2 Press the desired preset buttons [1] to [6].The preset station of the preset buttons [1] to [6] isdisplayed and the preset station is received.