Kenwood KDV-MP5343U Instruction Manual

38 | KDV-MP5343U/ KDV-MP5443U/ KDV-MP4343/ KDV-MP4443Troubleshooting GuideThe messages shown below display yoursystems condition.TOC ERR: • The disc is quite dirty. The disc is upside-down. The disc is scratched a lot.• No disc has been loaded in the discmagazine.E-05: The disc is unreadable.E-77: The unit is malfunctioning for some reason.➪ Press the reset button on the unit. If the“E-77” code does not disappear, consultyour nearest service center.E-99: Something is wrong with the disc magazine.Or the unit is malfunctioning for some reason.➪ Check the disc magazine. And then pressthe reset button on the unit. If the “E-99”code does not disappear, consult yournearest service center.MEC ERR: The unit is malfunctioning for some reason.➪ Press the [0] button on the unit. If theerror message does not disappear whenyou eject the disc and insert it again,consult your nearest service center.IN (Blink): The DVD player section is not operatingproperly.➪ Reinsert the disc. If the disc cannot beejected or the display continues to flasheven when the disc has been properlyreinserted, please switch off the powerand consult your nearest service center.PROTECT (Blink):The speaker wire has a short-circuit ortouches the chassis of the vehicle, and thenthe protection function is activated.➪ Wire or insulate the speaker cableproperly and press the reset button. Ifthe “PROTECT” code does not disappear,consult your nearest service center.NA FILE: An Audio file is played with a format that thisunit can’t support.COPY PRO: A copy-protected file is played.READ ERR: The file system of the connected USB deviceis broken.➪ Copy the files and folders for the USBdevice again. If the error message is stilldisplayed, initialize the USB device or useother USB devices.NO DVICE: The USB device is selected as a sourcealthough no USB device is connected.➪ Change the source to any source otherthan USB. Connect an USB device, andchange the source to USB again.NA DVICE: • An unsupported USB device is connected.• Connection to the iPod has failed.➪ Check that the connected iPod is an iPodthat is supported. See (page 4) for information on supportediPods.NO MUSIC/E-15:• The connected USB device contains noplayable audio file.• Media was played that does not have datarecorded that the unit can play.USB ERR: Some trouble may have occurred to theconnected USB device.➪ Remove the USB device, turn off the unit,wait for about 10 seconds, and then turnon the unit again. If the same display isrepeated, use another USB device.iPod ERR: Connection to the iPod has failed.➪ Remove the USB device and thenreconnect it.➪ Confirm that the software for the iPod isthe latest version.REG ERR: The disc you wanted to play has a regioncode that cannot be played with this unit.PARK OFF: Source for displaying video is selected whilecar is traveling.➪ Video will be displayed when the car isstopped and the parking brake has beenengaged.➪ Press the [DISP] button for at least 1second. The display of this unit can betemporarily hidden.READING: The unit is reading the data on the media.

/ 40

Related manuals for Kenwood KDV-MP4343