Kenwood KMD-44 Instruction Manual

Also see for KMD-44: Service manual Instruction manual

Kenwood KMD-44 Instruction Manual Manual pdf 7 page image

Adjust various parameters of sound quality.Press the AUD button to enter the control mode.Selecting modePress either the FM or AM button.Each time the button is pressed, the adjustment mode willchange.Please refer to the following for the contents of theadjustment modes.Source tone memoryEach source (CD, MD, FM, AM and disc changer) has its ownmemory in which to store the bass, middle, and treble tonesettings.The settings made for a particular source are recalledautomatically whenever you use that source ( for example, FMmode uses the tone settings made for FM, AM for AM, etc.).Adjust each modePress the 4/¢ button.Please refer to the following for the adjusting values.Press the AUD button to end the control mode.43NOTE21Audio Control SettingThis function amplifies low and high tones when the volume isturned down.The LOUD indicator lights up when the loudness function ison.Turning Loudness On/Off:Press the LOUD button for at least one second to switch theloudness on and off.Loudnessswitches as follows:Selecting standby mode:Press the SRC button repeatedly and switch to "ALL OFF" .When "ALL OFF" is displayed, the standby mode is activated.The standby mode turns all functions off while leaving thepower to the unit on. Use this mode when you want to havethe display illuminated but don't want to listen to anything.• The mode switches to the next mode from any mode whichcannot be used.• The external disc control mode will differ depending on the unitthat is connected.• To enable the selection of External disc control mode 2/AUXmode, you should connect optional switching adapter KCA-S210A (which allows you to select both External disc controlmode 2 and AUX mode) or CD changer (KDC-CPS87, KDC-CX87, KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) orswitching adapter CA-C1AX (which allows you to select AUXmode only).During the AUX mode, "AUX" (or AUX-name display) will showin the display. When the CA-C1AX is being used, the AUXMode will replace the External Disc Control Mode.Presetting AUX-name (Except the CA-C1AX)In the AUX mode, press the NAME.S button for at least twoseconds. "NAME SET" is display and AUX-name mode is entered.Input the characters, referring to the section on "Presetting DiscNames (DNPS)" (page 16).NOTENOTETuner modeMD modeExternal disc control mode 1External disc control mode 2/AUX modeStandby mode— 7 —