Kenwood KMM-100 Instruction Manual

Also see for KMM-100: Instruction manual

Contents

Kenwood KMM-100 Instruction Manual Manual pdf 4 page image

4GETTING STARTEDCancel the demonstrationWhen you turn on the power (or after you reset the unit), the display shows:“CANCEL DEMO” \ “PRESS” \ “VOLUME KNOB”1 Press the volume knob.[YES] is selected for the initial setup.2 Press the volume knob again.“DEMO OFF” appears.Set the clock1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to select [SETTINGS], then press the knob.3 Turn the volume knob to select [CLOCK], then press the knob.4 Turn the volume knob to select [CLOCK ADJ], then press the knob.5 Turn the volume knob to adjust the hour, then press the knob.6 Turn the volume knob to adjust the minute, then press the knob.Press 4 / ¢ to move between the hour and minute adjustment.7 Press and hold to exit.(or)Press and hold SCRL DISP to enter clock adjustment mode directly while in clockdisplay screen.Then, perform steps 5 and 6 above to set the clock.Set the initial settings1 Press SRC to enter [STANDBY].2 Press the volume knob to enter [FUNCTION].3 Turn the volume knob to select [INITIAL SET], then press the knob.4 Turn the volume knob to make a selection (see the following table), then press theknob.5 Press and hold to exit.• To return to the previous hierarchy, press .312