Kenwood KMM-100U Instruction Manual

Also see for KMM-100: Instruction manual

Contents

Kenwood KMM-100U Instruction Manual Manual pdf 5 page image

5ENGLISH |GETTING STARTEDDefault: XXPRESET TYPE NORM: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ AM). ;MIX: Memorizes one station for each preset button regardless of the selected band.KEY BEEP ON: Activates the keypress tone. ; OFF: Deactivates.PANDORA SRC KMM-100U :ON: Enables PANDORA in source selection. ; OFF: Disables. (➜ 9)BUILTIN AUX ON: Enables AUX in source selection. ; OFF: Disables. (➜ 10)SWITCH PRE REAR/ SUB-W: Selects whether rear speakers or a subwoofer are connected to the line outterminals on the rear (through an external amplifier).SP SELECT OFF/ 5/4/ 6 × 9/6/ OEM: Selects according to the speaker size (5 inches or 4 inches, 6×9 inchesor 6 inches) or OEM speakers for optimum performance.F/W UPDATEF/W UP xx.xx YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated).For details on how to update the firmware, see: www.kenwood.com/cs/ce/RADIOSearch for a station1 Press L SRC to select TUNER.2 Press repeatedly (or press * AM– / #FM+ on RC-406) to select FM1/ FM2/ FM3/ AM.3 Press 4 / ¢ (or press 4 / ¢ (+) on RC-406) to search for a station.• To store a station: Press and hold one of the number buttons (1 to 6).• To select a stored station: Press one of the number buttons (1 to 6) (or press one of thenumber buttons (1 to 6) on RC-406).Direct Access Tuning (using RC-406)1 Press *AM– / #FM+ to select a band.2 Press DIRECT to enter Direct Access Tuning.“– – – • –” (for FM) or “– – – –” (for AM) appears on the display.3 Press the number buttons to enter a frequency.4 Press ENT 38 to search for a frequency.• To cancel, press .• If no operation is done for 10 seconds after step 3, Direct Access Tuning is automatically canceled.